Specifications

Initial Programming Flowchart
START
A
Refer to SP Form B1 to identify the
VMS extensions for the PARTNER
MAIL VS system.
Use Hunt Group Extensions (#505)
to assign both VMS extensions to
Hunt Group 7.
C1
Go To C
Use Transfer Return Extension
(#306) to specify extension 10 as
the transfer return extension for
each of the VMS extensions.
C2
Yes
Go To A
Go To B
No
Go To B
Go To B
C7
Key:
Go To B
●
SP – Refers to the System Planner
forms for the Communications
System.
●
PG – Refers to the Planning Guide
forms for the Voice
Messaging System.
●
C# – Refers to a quick reference
programming procedure for
the Communications System
(p. 4-18).
●
V# – Refers to a quick reference
programming procedure for
the Voice Messaging System
(p. 4-17).
Refer to SP Form A, Item 7, Line
Use Group Call Distribution (#206)
Coverage to see if VMS-AA is
Yes
to assign VMS-AA lines to Hunt
specified for any lines.
Group 7.
C3
No
Refer to SP Form A, Item 9 to check
VMS Hunt Delay and VMS Hunt
Schedule settings for the PARTNER
MAIL VS system.
If Immediate and Always are
checked, this site uses immediate
call handling all the time (day and
night).
●
Leave VMS Hunt Delay (#506) at
factory setting (Immediate)
●
Leave VMS Hunt Schedule (#507)
at factory setting (Always)
●
Program a Night Service Button
(#503) at extension 10
C7
If Delayed and Always are checked,
Yes
●
Set VMS Hunt Delay (#506)
this site uses delayed call handling
to Delayed
C4
all the time (day and night).
●
Leave VMS Hunt Schedule
(#507) at factory setting (Always)
●
Program a Night Service Button
(#503) at extension 10
C7
No
If Immediate and Day Only are
Yes
checked, this site uses immediate
call handling only during the day.
No
If Delayed and Day Only are
checked, this site uses delayed call
handling only during the day.
No
If Immediate and Night Only are
checked, this site uses immediate
call handling only at night.
Go To B
C5
C7
No
If Delayed and Night Only are
checked, this site uses delayed call
handling only at night.
Yes
Yes
Yes
●
Leave VMS Hunt Delay (#506) at
factory setting (Immediate)
●
Set VMS Hunt Schedule
(#507) to Day Only
C5
●
Program a Night Service Button
(#503) at extension 10
●
Set VMS Hunt Delay (#506)
to Delayed
C4
●
Set VMS Hunt Schedule
(#507) to Day Only
C5
●
Program a Night Service Button
(#503) at extension 10
C7
●
Leave VMS Hunt Delay (#506) at
factory setting (Immediate)
●
Set VMS Hunt Schedule
(#507) to Night Only
●
Program a Night Service Button
(#503) at extension 10
●
Set VMS Hunt Delay (#506)
to Delayed
C4
●
Set VMS Hunt Schedule
(#507) to Night Only
C5
●
Program a Night Service Button
Go To B
(#503) at extension 10
C7
4-14 Initial Programming