Specifications

Verifying System Operation
Once you have completed programming for the voice messaging system and
the communications system, you should perform the acceptance tests
discussed below to verify system operation.
You should perform these tests from extension 11 to keep extension 10 free for
the receptionist to handle calls.
Voice Mail Service
Make a call to the VMS Hunt Group by pressing [ Intercom ] [ 7 ] [ 7 ] [ 7 ] or a
programmed button. You should hear the Voice Mail Service greeting:
Welcome to PARTNER MAIL VS. Please enter extension and
pound sign. Otherwise, to access PARTNER Tutor, press
star 4.
Automated Attendant Service
If the VMS Hunt Schedule is set for Day Only or Always, ensure that the Night
Service button at extension 10 is off to test the day menu. If the VMS Hunt
Schedule is set for Night Only or Always, ensure that the Night Service button is
on to test the night menu.
Day Menu (Night Service button is off)
1.
2.
3.
4.
5.
6.
7.
Call in on a line answered by the Automated Attendant Service.
If the system is set for:
■
Immediate, Automated Attendant Service should answer the call on the
second ring.
■
Delayed, Automated Attendant Service should answer the call on the
fourth ring.
Listen for the Day Menu Prompt.
After the prompt, choose an option from the day menu.
Make sure your call is transferred to the appropriate extension or group.
Repeat Steps 1 through 5 for each option on the day menu.
Repeat Steps 1 through 3 for each line that has Automated Attendant Service
coverage.
4-12 Initial Programming