Specifications

Voice Mailbox Transfer
This button lets any system user transfer calls directly to a subscriber’s mailbox,
without ringing the extension first.
To program a Voice Mailbox Transfer (VMBox) button as specified on Form C:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2. Enter the number of an extension to be programmed as specified on Form C.
3.
Press a programmable button.
4. Press [ Feature ] [ 1 ] [ 4 ].
5.
At this point, do one of the following:
■
Go to Step 3 of the next procedure to program another button for this
extension.
■
Press [ Central Tel Program ] and go to Step 2 of a button programming
procedure in this section to program a button for a different extension.
■
Press [ Feature ] [ 0 ] [ 0 ] to exit.
Voice Mail Messages
This intercom Auto Dial button allows subscribers to access the voice
messaging system with the touch of one button.
To program a Voice Mail Messages (VMMsgs) button as specified on Form C:
1.
2.
3.
4.
5.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
Dial the number of an extension to be programmed as specified on Form C.
Press a programmable button.
Press left [ Intercom ] [ 7 ] [ 7 ] [ 7 ].
At this point, do one of the following:
■
Press [ Central Tel Program ] and go to Step 2 of a button programming
procedure in this section to program a button for a different extension.
■
Press [ Feature ] [ 0 ] [ 0 ] to exit.
Initial Programming 4-11