Specifications
VMS Hunt Schedule
Use this procedure to specify when the communications system is to route calls
to the voice messaging system.
To change the VMS Hunt Schedule setting from Always to Day Only or Night
1.
2.
3.
Night Service
Only as specified on Form A, item 9:
Press [
#
] [
5
] [
0
] [
7
].
Press [ Next Data ] until the appropriate value displays.
Continue with “Night Service Button” below.
Use this procedure to program a Night Service button.
To program Night Service on a button with lights at extension 10 as specified on
Form C:
1.
Press [
#
] [
5
] [
0
] [
3
].
2.
At this point:
If you want to assign Night Service to the first available button on the
system phone, press [
Next Data ] until the display reads:
Night Service
1 Assigned—Ext10
If you want to assign Night Service to a specific button, press [ 3 ]. The
display reads:
Night Service
3 Select Button
Press the desired programmable button with lights to assign Night Service
to that button.
3.
Label the Night Service button at extension 10.
4.
Continue with the next section, “Call Answer Service.”
4-8 Initial Programming