Specifications

Initial Programming
4
Overview
This chapter tells you how to program the voice messaging system and
communications system for initial installations. It begins with two procedures
that allow you to access and program the voice messaging system—you must
perform these procedures first for every installation. The next section deals with
voice messaging system programming and the last section covers
communications system programming.
The procedures in this chapter are in this order to enable you to program the
menu definition and record the day and/or night prompts before the voice
messaging system begins to handle calls—this order is recommended for voice
messaging systems that are being added to existing communications systems.
If this is a new installation, however, you can program the communications
system first, and then the voice messaging system if you prefer.
Additionally, you can either follow the step-by-step instructions or use the
flowchart at the end of this chapter as a quick guide.
Initial Programming
4-1