Specifications

Understanding Programming
3
This chapter provides general programming information for the communications
system and the voice messaging system. Both systems must be programmed
so they can work together as an integrated unit.
Communications System Programming
When the communications system is installed, it uses factory settings that reflect
the most common usage of the equipment. You can change these settings as
required to customize them for your business.
You can program the communications system from extension 10 or 11. Since
an extension cannot be in programming mode and handle calls at the same
time, and since extension 10 is programmed as the receptionist’s extension, you
may find it more convenient to program from extension 11 while the receptionist
continues to handle calls from extension 10.
System Programming changes settings for the system as a whole, or for
individual lines or extensions. (Refer to the communication system’s
Programming and Use guide for more information on System Programming
options.)
Understanding Programming 3-1