User Manual
Table Of Contents
- Getting started
- Installation options
- Initial setups
- Battery installation and charging
- Telephone base and charger installation
- Quick reference guide - telephone base
- Quick reference guide - handset
- Telephone settings
- Telephone operation
- Directory
- Caller ID
- Smart call blocker
- Answering system
- Answering system settings
- Announcement
- Answer on/off
- Voice guide
- Call screening
- Number of rings
- Remote access code
- Message alert tone
- Message recording time
- Answering system and voicemail indicators
- Using the answering machine and voicemail together
- Message capacity
- Voice prompts
- Call screening
- Call intercept
- Base ringer
- Temporarily turning off the message alert tone
- Message playback
- Recording and playing memos
- Base message counter displays
- Remote access
- Answering system settings
- Appendix
- Adding and registering handsets/headsets/speakerphones
- Deregistering handsets
- Alert tones and lights
- Screen display messages
- Troubleshooting
- Maintenance
- Important safety information
- FCC Part 68 and ACTA
- FCC Part 15
- California Energy Commission battery charging testing instructions
- Limited warranty
- Technical specifications
- Index
Smart call blocker
73
Call block settings
Set Smart call blocker on/o
The Smart call blocker feature is set to on by
default.
1. Press CALL BLOCK on the handset when it is
not in use, and then press MENU/SELECT to
select SCB On/Off.
-OR-
Press MENU/SELECT to enter the main menu
when the handset is not in use. Press CID or
DIR to scroll to Smart call blk, then press
MENU/SELECT twice.
2. Press CID or DIR to highlight On or Off, then
press MENU/SELECT to save the setting. You
hear a confirmation tone.
Control calls without numbers
Use this setting to control “out of area” or “Private” calls. You can
choose to allow or reject these calls directly. You can also choose to
screen them with or without learning the callers’ names before you
decide whether to answer or reject these calls. Moreover, you can
forward these calls to the answering system.
To change the setting:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu
when the handset is not in use. Press CID or
DIR to scroll to Smart call blk, then press
MENU/SELECT.
Answering sys
>Smart call blk
Answering sys
>Smart call blk
>SCB On/Off
Block list