User Manual
Table Of Contents
- Getting started
- Installation options
- Initial setups
- Battery installation and charging
- Telephone base and charger installation
- Quick reference guide - telephone base
- Quick reference guide - handset
- Telephone settings
- Telephone operation
- Directory
- Caller ID
- Smart call blocker
- Answering system
- Answering system settings
- Announcement
- Answer on/off
- Voice guide
- Call screening
- Number of rings
- Remote access code
- Message alert tone
- Message recording time
- Answering system and voicemail indicators
- Using the answering machine and voicemail together
- Message capacity
- Voice prompts
- Call screening
- Call intercept
- Base ringer
- Temporarily turning off the message alert tone
- Message playback
- Recording and playing memos
- Base message counter displays
- Remote access
- Answering system settings
- Appendix
- Adding and registering handsets/headsets/speakerphones
- Deregistering handsets
- Alert tones and lights
- Screen display messages
- Troubleshooting
- Maintenance
- Important safety information
- FCC Part 68 and ACTA
- FCC Part 15
- California Energy Commission battery charging testing instructions
- Limited warranty
- Technical specifications
- Index
Smart call blocker
69
About Smart call blocker*
If you have subscribed to caller ID service, then you can use Smart
while allowing welcome calls to get through.
You can set up your lists of welcome callers and unwelcome callers.
Smart call blocker allows calls from your welcome callers to get
through, and it blocks calls from your unwelcome callers.
For other unknown calls, you can allow these calls, block these calls,
or forward these calls to the answering system.
asking the callers to press the pound key (#) before the calls are put
through to you.
You can also set Smart call blocker to screen incoming calls by
asking the callers to record their names and press the pound key
(#
and announces the caller’s name. You can then choose to block or
answer the call, or you can forward the call to the answering system.
If the caller does not respond or record his/her name, the call is
blocked from ringing through. When you add your welcome callers to
your allow list, they will bypass all screening and ring directly to your
handsets.
Notes:
Smart call blocker is on, once you install your telephone. It allows all incoming calls to get through
and ring by default. You can change the Smart call blocker settings to screen incoming calls. For
more details, see Control calls without numbers on page 73 and Control uncategorized calls
on page 74.
With call screening active, Smart call blocker screens and lters all incoming calls from numbers or
names that are not yet saved in your directory, allow list, block list, or star name list. You can easily
add incoming phone numbers to your allow list and block list. This allows you to build up your lists
of allowed and blocked numbers, and Smart call blocker will know how to deal with these calls
when they come in again.
To turn o Smart call blocker, see Set Smart call blocker on/o on page 73.
* Includes licenced Qaltel
TM
technology.
Qaltel
TM
is a trademark of Truecall Group Limited.