User Manual
Table Of Contents
- Getting started
- Installation options
- Initial setups
- Battery installation and charging
- Telephone base and charger installation
- Quick reference guide - telephone base
- Quick reference guide - handset
- Telephone settings
- Telephone operation
- Directory
- Caller ID
- Smart call blocker
- Answering system
- Answering system settings
- Announcement
- Answer on/off
- Voice guide
- Call screening
- Number of rings
- Remote access code
- Message alert tone
- Message recording time
- Answering system and voicemail indicators
- Using the answering machine and voicemail together
- Message capacity
- Voice prompts
- Call screening
- Call intercept
- Base ringer
- Temporarily turning off the message alert tone
- Message playback
- Recording and playing memos
- Base message counter displays
- Remote access
- Answering system settings
- Appendix
- Adding and registering handsets/headsets/speakerphones
- Deregistering handsets
- Alert tones and lights
- Screen display messages
- Troubleshooting
- Maintenance
- Important safety information
- FCC Part 68 and ACTA
- FCC Part 15
- California Energy Commission battery charging testing instructions
- Limited warranty
- Technical specifications
- Index
Caller ID
66
Caller ID operation
Save a caller ID log entry to the allow list
1. When in the caller ID log, press CID or DIR to browse.
2. When the desired entry displays, press MENU/SELECT.
3. Press CID or DIR to choose Allow list, then press
MENU/SELECT.
4. When the screen displays EDIT NUMBER, use the dialing keys to
edit the number.
Press CID or DIR to move the cursor to the left or right.
Press MUTE/DELETE to backspace and erase a digit.
Press and hold MUTE/DELETE to erase the entire entry.
Press and hold REDIAL/PAUSE to insert a three-second dialing
pause (a p appears).
5. Press MENU/SELECT to move to the name.
6. When the screen displays EDIT NAME, use the dialing keys (page
50) to edit the name.
Press CID or DIR to move the cursor to the left or right.
Press 0 to add a space.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press # (pound key) to move the last word to the front. For
example, Johnson Charlie becomes Charlie Johnson when
you press # (pound key).
Press TONE to change the next letter to upper or lower case.
7. Press MENU/SELECT when done. The screen shows Saved to
allow list.
Save a caller ID log entry to the block list
1. When in the caller ID log, press CID or DIR to browse.
2. When the desired entry displays, press MENU/SELECT.
3. Press CID or DIR to choose Block list, then press
MENU/SELECT.
4. When the screen displays EDIT NUMBER, use the dialing keys to
edit the number.