User Manual

Appendix
137
Troubleshooting
I cannot dial out.
 Try all the suggestions, as mentioned above.
 Make sure you have a dial tone before dialing. The cordless

and produce a dial tone. This is normal. Wait an extra second
before dialing.
 Eliminate any background noise. Noise from a television, radio or
other appliances may cause the phone to not dial out properly. If

cordless handset before dialing, or dialing from another room
with less background noise.
 If other phones in your home are having the same problem,
contact your telephone service provider (charges may apply).
My cordless handset isn’t performing normally.
 Make sure you plug the power cord securely into the telephone

outlet without a wall switch.
 Move the cordless handset closer to the telephone base. You
may have moved out of range.
 Reset the telephone base. Unplug the electrical power. Wait for
15 seconds, then plug it back in. Allow up to one minute for the
cordless handset and telephone base to reset.
 Other electronic products such as HAM radios and other DECT
phones, can cause interference with your cordless phone. Try
installing your phone as far away as possible from these types of
electronic devices.
Out of range OR No pwr at base appears on my cordless
handset.
 Ensure you plug the telephone base in properly and the power
is on.
 Place the cordless handset in the telephone base for one minute
to allow the cordless handset and base to synchronize.
 Move the cordless handset closer to the telephone base. You
may have moved out of range.