Meijer.com User’s manual CL81101/CL81201/CL81211/ CL81301 DECT 6.
Congratulations Meijer.com on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information section on pages 57-58 of this manual. Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Meijer.com Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. User’s manual CL81101/CL81201/CL81211/ CL81301 DECT 6.0 cordless telephone with caller ID/call waiting User’s manual Quick start guide CL81101/CL81201/CL81211/ CL81301 DECT 6.
User’s manual Meijer.com CL81101/CL81201/CL81211/ CL81301 DECT 6.0 cordless telephone with caller ID/call waiting Table of contents Getting started Quick reference guide - handset......... 1 Quick reference guide - telephone base.............................................................. 3 Installation...................................................... 4 Telephone base and charger installation................................................ 5 Telephone base installation.............
Push-to-talk (PTT).................................... 26 Turn PTT on or off.............................. 26 PTT call to a single handset......... 26 PTT call to a group of handsets.... 27 Answer a PTT call............................... 28 Change a one-to-one PTT call to an intercom call......................... 28 Answer an incoming call during PTT.......................................................... 29 Make an outgoing call during PTT....29 End or leave a PTT call....................
Meijer.com Getting started Quick reference guide - handset CHARGE indicator pDIR/VOLUME On when the handset is charging in the telephone base or charger. Press pDIR to show directory entries (page 33). Press to scroll up while in menus. While entering names or numbers, press to move the cursor to the right. Press to increase the listening volume when on a call (page 20). qCID/VOLUME Press qCID to show caller ID history (page 39). Press to scroll down while in menus.
Getting started Quick reference guide - handset Meijer.com PUSH TO TALK Press to initiate a one-to-one (page 26) or one-to-group broadcast (page 27). Press and hold to broadcast to a group of handsets (page 27). Main menu Directory (page 30) Main menu The > symbol highlights a menu item. >Directory Caller ID log p q Caller ID log (page 37) Intercom (page 24) Ringers (page 10) Set date/time (page 12) Settings (page 13) Website (page 16) Using menus: • Press MENU/SELECT to show the menu.
Getting started Quick reference guide - telephone base IN USE indicator On when the handset is in use. On when a handset is being registered. Flashes when there is an incoming call or when a handset is being deregistered. Flashes when another telephone is in use on the same line. /HANDSET LOCATOR Press to start the paging tone on all handsets for 60 seconds. (page 23). Meijer.
Meijer.com Getting started Installation You must install and charge the battery before using the telephone. STOP! See pages 6-7 for easy instructions. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (see page 8). For optimum range and better reception, place the telephone base in a central and open location.
Meijer.com Getting started Telephone base and charger installation Install the telephone base and charger as shown below. The telephone base is ready for tabletop use. If you want to change to wall mounting, see Installation options on page 8 for details. Telephone base installation • Plug the large end of the power adapter into a power outlet not controlled by a wall switch. • Route the power adapter cord and the telephone line cord through these slots.
Meijer.com Getting started Battery installation and charging Install the battery as shown below. Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 10 hours of continuous charging. See the table on page 64 for battery operating times.
Getting started Battery installation and charging Meijer.com CHARGE light Step 3 Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light on the top of the handset is on during charging. After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. For instructions, see Set date/time on page 12. To skip setting the date and time, press OFF/CANCEL.
Meijer.com Getting started Installation options Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, use the provided wall mount bracket to connect with a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronic retailers. You might need a professional to install the mounting plate. Tabletop to wall mount installation 1.
Meijer.com Getting started Installation options Wall mount to tabletop installation 1. If the telephone line cord and power adapter cord are bundled, untie them first. 2. Push the telephone base up to detach it from the wall mount bracket. Unplug the telephone line cord (or DSL filter) from the wall. Unplug the power adapter from the power outlet. 3. Push the wall mount bracket up to remove it from the wall. 4. See Telephone base and charger installation on page 5.
Meijer.com Telephone settings Handset settings Use the menu to change the telephone settings. 1. Press MENU/SELECT when in idle mode (when the phone is not in use) to enter the main menu. 2. Press qCID or pDIR to scroll to the feature to be changed. When scrolling through the menu, the > symbol indicates the selected menu item. 3. Press MENU/SELECT to select the highlighted item.
Meijer.com Telephone settings Handset settings Ringer tone You can choose one of 10 ringer tones. 1. Press MENU/SELECT in idle mode to enter the main menu. 2. Use qCID or pDIR to scroll to >Ringers, then press MENU/SELECT. 3. Press qCID or pDIR to scroll to >Ringer tone, then press MENU/SELECT. 4. Press qCID or pDIR to sample each ringer tone. 5. Press MENU/SELECT to save your preference. There is a confirmation tone and the screen returns to the previous menu.
Meijer.com Telephone settings Handset settings Set date/time If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. You can turn off the date and time settings of the caller ID service and set the date and time manually (see Use caller ID to automatically set date and time on page 15). After a power failure or handset registration, the system reminds you to set the date and time. Follow the steps below to set the month, day, year and time.
Meijer.com Telephone settings Handset settings LCD language You can select the language used for all screen displays. 1. Press MENU/SELECT in idle mode to enter the main menu. 2. Use qCID or pDIR to scroll to >Settings, then press MENU/SELECT. 3. Press MENU/SELECT to choose >LCD language. 4. Press qCID or pDIR to highlight >English, >Français or >Español. 5. Press MENU/SELECT to save. There is a confirmation tone and the screen returns to the previous menu.
Meijer.com Telephone settings Handset settings NOTES: • Your telephone service provider voicemail might alert you to new messages with a stutter (broken) dial tone. Contact your telephone service provider for more details. • For information about using your voicemail service, contact your telephone service provider. Rename handset You can create a handset name for each system handset. Clr voicemail 1. When the handset is idle, press MENU/SELECT. >Rename handset p 2.
Meijer.com Telephone settings Handset settings Use caller ID to automatically set date and time Follow the steps below to turn the CID time sync feature on or off. The default setting is On. 1. When the handset is in idle mode, press MENU/SELECT to enter the main menu. 2. Press qCID or pDIR to scroll to >Settings, then press MENU/SELECT. 3. Press qCID or pDIR to scroll to >CID time sync, then press MENU/SELECT. 4. Press qCID or pDIR to highlight >On or >Off, then press MENU/SELECT to save.
Meijer.com Telephone settings Handset settings NOTE: If in the future, your telephone service provider requires you to dial 10 digits to make a local call (area code plus telephone number), you need to delete your home area code and dial out locally from the caller ID log. With the home area code displayed, press and hold MUTE/DELETE until the digits are deleted, and then press MENU/SELECT. The home area code is now restored to its default setting of _ _ _ (empty).
Meijer.com Telephone operation Handset operation Making a call • Press PHONE/FLASH or telephone number. /������� SPEAKER, then enter the Elapsed time Phone 0:00:30 The screen displays the elapsed time as you talk (in hours, minutes and seconds). NOTE: Pressing PHONE/FLASH to access services from your telephone service provider does not affect the elapsed time. On hook dialing (predialing) 1. Enter the telephone number. Press MUTE/DELETE to make corrections when entering the phone number. 2.
Meijer.com Telephone operation Handset operation Speakerphone During a call, press /������� SPEAKER to switch between handsfree speakerphone and normal handset use. Press OFF/CANCEL to hang up. NOTES: Elapsed time Speaker 0:00:30 10/15 10:01 AM • When you use the speakerphone, the key pad of the handset and the /SPEAKER button are lit. • The speakerphone uses more power than the normal handset.
Meijer.com Telephone operation Handset operation Equalizer The equalizer feature on the handset enables you to change the quality of the audio to best suit your hearing. While on a call or intercom call, press EQ to select the equalizer setting Treble 1, Treble 2, Bass or Natural (the default setting). The current setting is shown on the handset screen for two seconds. NOTES: • If you switch the call between the handset and the speakerphone by pressing /SPEAKER, the audio setting remains unchanged.
Meijer.com Telephone operation Options while on calls Volume control While on a call, press qCID/VOLUME to decrease or press pDIR/VOLUME to increase the listening volume. You can set the listening volume to one of six levels. pDIR/VOLUME qCID/VOLUME NOTES: • Handset and speakerphone volume settings are independent. • When the volume reaches the minimum or maximum setting, you hear two beeps.
Meijer.com Telephone operation Options while on calls Chain dialing Use this feature to initiate a dialing sequence from the numbers in the directory, caller ID history or redial memory while you are on a call. Chain dialing is useful when you wish to access other numbers (such as bank account numbers or access codes) from the directory, caller ID history or redial list. To access the directory while on a call: 1. Press MENU/SELECT. 2. Press qCID or pDIR to scroll to >Directory and then press MENU/SELECT.
Telephone operation Options while on calls Meijer.com Temporary tone dialing If you have pulse (rotary) service only, you can switch from pulse to touch-tone dialing temporarily during a call. This is useful if you need to send touch-tone signals to access your telephone banking or long distance services. 1. During a call, press TONE . 2. Use the dialing keys to enter the desired number. The telephone sends touch-tone signals. 3.
Meijer.com Multiple handset use Multiple handset use Handset locator The handset locator feature is useful if you misplace any handsets. To start the paging tone: • Press /HANDSET LOCATOR on the telephone base to start the paging tone on all handsets for 60 seconds. NOTE: If you press OFF/CANCEL or MUTE/DELETE on a handset, the ringer of that handset stops, but the paging to the rest of the handsets continues.
Meijer.com Multiple handset use Intercom Use the intercom feature for conversations between two handsets. This feature is only available if you have at least two system handsets. Intercom is not available for the CL81101 model. You can buy accessory handsets (AT&T model CL80101) to expand your system. Use a handset to initiate intercom calls and transfer calls. Calling other handset Other handset is calling 1. Press MENU/SELECT in idle mode to enter the main menu.
Meijer.com Multiple handset use Intercom Answer an incoming call during an intercom call If you receive an incoming outside call during an intercom call, there is a call waiting tone. • To answer the call, press PHONE/FLASH. The intercom call ends automatically. The party on the intercom call hears four beeps. Other system handsets can also answer the incoming call by pressing PHONE/FLASH. • To end the intercom call without answering the incoming call, press OFF/CANCEL.
Meijer.com Multiple handset use Push-to-talk (PTT) PTT You can directly broadcast messages to the speakerphone of any handset. Any handset you call can respond by pressing the PUSH TO TALK key to begin two-way communication. • Only one handset can talk at a time. To do so, press and hold PUSH TO TALK. • You must release PUSH TO TALK, so the other person can respond. • Only one PTT session can be active at a time.
Meijer.com Multiple handset use Push-to-talk (PTT) 2. Press and hold PUSH TO TALK on your handset. A chirp PTT To indicates your microphone is on. Speak towards the handset. handset: X Your voice is broadcast to the destination handset. While you are speaking, your handset screen shows PTT To handset: X. 3. Release PUSH TO TALK after speaking. Both handsets beep once again.
Meijer.com Multiple handset use Push-to-talk (PTT) NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically. Answer a PTT call You can respond to a PTT call whenever the speakerphone light is off, as described below. 1. When your handset receives a PTT call, the handset beeps and the screen shows Press and hold [PTT] to talk. 2.
Meijer.com Multiple handset use Push-to-talk (PTT) Answer an incoming call during PTT When you receive an incoming outside call during PTT, there is an alert tone. • During a one-to-one PTT, press PHONE/FLASH on the initiating or destination handset. The PTT call ends automatically and the outside call is answered. • During a one-to-group PTT, press PHONE/FLASH on the initiating handset. The PTT call ends automatically and the outside call is answered.
Meijer.com Directory About the directory Shared directory The directory is shared by all handsets. Changes made to the directory from any handset apply to all. NOTE: Only one handset can review the directory at a time. If another handset tries to enter the directory, the screen shows Not available at this time. Charlie Johnson 888-883-2445 p q Capacity The directory can store up to 50 entries, with a maximum of 15 alphanumeric characters (including spaces) for names and 30 digits for telephone numbers.
Meijer.com Directory Create directory entries Create a new directory entry 1. Press MENU/SELECT in idle mode to enter the main menu. 2. Press MENU/SELECT to select >Directory. 3. Press qCID or pDIR to highlight >Add contact. 4. Press Caller ID log p q MENU/SELECT. 5. Use the dialing keys to enter a telephone number (up to 30 digits) when prompted. • • • • >Directory Press qCID or pDIR to move the cursor to the left or right. Press MUTE/DELETE to erase a digit.
Meijer.com Directory Create directory entries Dialing keys Characters by number of key presses 1 2 3 4 5 6 7 8 9 10 11 # & / , s 7 z 9 1 1 . - ‘ ( ) * 2 A B C a b c 2 3 D E F d e f 3 4 G H I g h i 4 5 J K L j k l 5 6 M N O m n o 6 7 P Q R S p q r 8 T U V t u v 8 Y Z w x y 9 W X 0 space 0 * # 8. Press MENU/SELECT to store your new directory entry. There is a confirmation tone and the screen shows Saved.
Meijer.com Directory Review the directory Review directory entries 1. Press DIRp when in idle mode. The summary screen shows briefly and then the first entry in the directory shows. -ORPress MENU/SELECT when in idle mode, then press MENU/SELECT to select >Directory. Press MENU/SELECT again to select >Review. 2. Press qCID or pDIR to browse through the directory. Entries appear alphabetically by the first letter in the name.
Directory Dial, delete or edit directory entries Meijer.com To dial, delete or edit a directory entry (name and number), the entry must be displayed on the handset. Use Review the directory (page 33) to show an entry. Display dial To dial a displayed number from the directory, press /������� SPEAKER. PHONE/FLASH or Delete a directory entry To delete the displayed directory entry, press MUTE/DELETE. Press MENU/SELECT to confirm. There is a confirmation tone and the screen shows Contact deleted.
Meijer.com Directory Speed dial The telephone base has 10 speed dial locations (0-9) where you can store the telephone numbers you wish to dial more quickly. You can store up to 30 digits in each location. Speed dial assignments can only be selected from existing directory entries. In the directory, speed dial locations are indicated by their number in the bottom right hand corner of the entry. Robert Brown 888-883-2445 p q 1 Speed dial location Assign a speed dial number 1.
Meijer.com Directory Speed dial Delete a speed dial number 1. When the telephone is idle, press MENU/SELECT. Linda Miller 2. ����� Press MENU/SELECT to select >��������� Directory. 888-722-7702 p 3. Press qCID or pDIR to scroll to >������������ Speed dial. Press q MENU/SELECT. 1 4. Press qCID or pDIR to scroll to the location you wish to delete the speed dial number from, then press MUTE/DELETE.
Meijer.com Caller ID About caller ID This product supports caller ID services offered by most telephone service providers. Caller ID allows you to see the name, number, date and time of calls. The available caller ID information will appear after the first or second ring. Information about caller ID with call waiting Caller ID with call waiting lets you see the name and telephone number of the caller before answering the call, even while on another call.
Meijer.com Caller ID Caller ID history How the caller ID history (caller ID log) works The telephone stores caller ID information about the last 50 incoming calls in the telephone base. Entries are stored in reverse chronological order. The phone deletes the oldest entry when the log is full to make room for new calls. This information is common to all handsets, so changes made using any handset are reflected in all other handsets.
Meijer.com Caller ID Caller ID operation Memory match If the incoming telephone number matches the last seven digits of a telephone number in your directory, the name that appears on the screen matches the corresponding name in your directory. For example, if Christine Smith calls, her name appears as Chris if this is how you entered it into your directory.
Meijer.com Caller ID Caller ID operation NOTE: Only one handset can review the caller ID history at a time. If another handset tries to enter the directory or caller ID history, it shows Not available at this time. View dialing options Although the incoming caller ID log entries have 10 digits (the area code plus the seven-digit number), in some areas, you might need to dial only the seven digits, 1 plus the seven digits, or 1 plus the area code plus the seven digits.
Meijer.com Caller ID Caller ID operation Save a caller ID log entry to the directory 1. When in the caller ID log, press qCID or pDIR to browse. 2. Press MENU/SELECT to select an entry. The screen displays EDIT NUMBER. 3. Use the dialing keys to edit the number. • Press qCID or pDIR to move the cursor to the left or right. • Press MUTE/DELETE to backspace and erase a digit. • Press and hold MUTE/DELETE to erase the entire entry.
Caller ID Reasons for missing caller ID information Meijer.com There are occasions when other information or no information shows for various reasons: On-screen message Reason PRIVATE NUMBER The caller prefers not to show the phone number. PRIVATE NAME The caller prefers not to show the name. PRIVATE CALLER The caller prefers not to show the phone number and name. UNKNOWN NUMBER Your telephone service provider cannot determine the caller’s number.
Appendix Adding and registering handsets Your telephone can support up to 12 cordless handsets (AT&T model CL80101, sold separately). The handset must be registered to the telephone base before use. You must register each handset separately. Meijer.com Put HS on BASE to register The handsets provided within your product box are already registered as HANDSET 1 and so forth. Additional handsets are assigned numbers in the sequential order they are registered (up to HANDSET 12).
Meijer.com Appendix Deregistering handsets You may need to deregister your handsets if: • You have 12 registered handsets and need to replace a handset. -OR• You wish to change the designated handset number of your registered handsets. You must first deregister ALL the handsets, and then register each handset you wish to use again, one at a time. Please read carefully through all the instructions on this page before beginning the deregistration process. Deregister all handsets from your telephone base 1.
Meijer.com Appendix Alert tones and lights Screen icons Battery status - low battery (flashing); place handset in telephone base or charger to recharge. NEW MUTE Battery status - battery is charging (animated display). 10:21 AM Speakerphone - the speakerphone is in use. Ringer off - the handset ringer is off. New voicemail - you have new voicemail from your telephone service provider. NEW New caller ID log - new or missed calls. MUTE MUTE - the handset microphone is off.
Meijer.com Appendix Alert tones and lights Lights IN USE On when the handset is in use. On when a handset is being registered. Flashes when there is an incoming call or when a handset is being deregistered. Flashes when another telephone is in use on the same line. CHARGE On when the handset is charging in the telephone base or charger. Lighted display Lighted key pad /������� SPEAKER On when the speakerphone is on.
Appendix Handset display screen messages Meijer.com Screen display messages Caller ID log empty There are no entries in the caller ID history. Call transferred You have transferred an outside call to another cordless handset. Calling HANDSET X The handset is calling another handset (for intercom calls). The handset is transferring an outside call to another handset.
Appendix Handset display screen messages Meijer.com Screen display messages No line There is no telephone line connection. No answer. Try again The handset(s) you are trying to transfer a call to is out of range, off hook, or has no power. Number already saved The telephone number you have entered is already in the directory. Not available Someone else is already using the directory or caller ID history.
Meijer.com Appendix Troubleshooting If you have difficulty with your phone please try the suggestions below. For Customer Service, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. My telephone doesn’t work at all. • Make sure the power cord is securely plugged in. • Make sure you plug the battery connector securely into the cordless handset.
Meijer.com Appendix Troubleshooting • Eliminate any background noise. Noise from a television, radio or other appliances might cause the phone to not dial out properly. If you cannot eliminate the background noise, first try muting the cordless handset before dialing, or dialing from another room with less background noise. • If other phones in your home are having the same problem, contact your telephone service provider (charges might apply). My cordless handset isn’t performing normally.
Meijer.com Appendix Troubleshooting • Charge the battery in the cordless handset for at least 10 hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use. • If the battery is depleted, it might take approximately 30 minutes to charge the handset before it shows Low battery. Refer to the table on page 6 for details. • You might need to purchase a new battery. Please refer to Battery installation and charging in this user’s manual on pages 6-7.
Meijer.com Appendix Troubleshooting I hear other calls while using my phone. • Disconnect the telephone base from the telephone jack, and plug in a different telephone. If you still hear other calls, call your telephone service provider. My cordless handset does not ring when I receive a call. • Make sure that the ringer is not off. Refer to Ringer volume on page 10 in this user’s manual. • Make sure you plug in the telephone line cord securely into the telephone base and the telephone jack.
Meijer.com Appendix Troubleshooting My calls cut in and out while I’m using my cordless handset. • Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. • Do not install this phone near a microwave oven or on the same electrical outlet. You might experience decreased performance while the microwave oven is operating.
Meijer.com Appendix Troubleshooting • If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (page 5). The filter prevents noise and caller ID problems resulting from DSL interference. Please contact your DSL service provider for more information about DSL filters. System does not receive caller ID when on a call.
Meijer.com Appendix Troubleshooting Common cure for electronic equipment. If the telephone does not seem to be responding normally, try putting the cordless handset in the telephone base or charger. If it does not fix the problem, do the following (in the order listed): 1. Disconnect the power to the telephone base. 2. Disconnect the cordless handset battery. 3. Wait a few minutes. 4. Connect power to the telephone base. 5. Completely remove the battery.
Meijer.com Appendix Maintenance Taking care of your telephone • Your cordless telephone contains sophisticated electronic parts, so you must treat it with care. • Avoid rough treatment. • Place the handset down gently. • Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water • You can damage your telephone if it gets wet. Do not use the handset in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.
Meijer.com Appendix Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information • • Read and understand all instructions in the user’s manual. Observe all markings on the product. • Do not use a telephone in the vicinity of a gas leak.
Meijer.com Appendix Important safety information Especially about cordless telephones • Privacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the handset by radio waves, so there is a possibility that your cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset.
Appendix FCC Part 68 and ACTA Meijer.com This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request.
Meijer.com Appendix FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation.
Meijer.com Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. about this product should be directed to our website at 1.
Meijer.
Meijer.com Appendix Limited warranty 7. Other limitations This warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty exclusively describes all of the manufacturer’s responsibilities regarding the PRODUCT. There are no other express warranties.
Meijer.com Appendix Technical specifications RF frequency band 1921.536MHz - 1928.448MHz Channels 5 Operating temperature 32°F - 122°F 0°C - 50°C Telephone base voltage 96Vrms - 130Vrms (AC voltage, 60Hz) Telephone base voltage 6VAC @ 300mA (AC adapter output) Handset voltage 2.4VDC - 3.
Meijer.
Meijer.
Meijer.com www.telephones.att.com © 2010-2011 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Issue 3 AT&T 01/11.
