User’s manual CL4939 Big button big display telephone/answering system with caller ID/ call waiting
Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read the Important safety information on page 60 of this user’s manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information you need to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.
STOP! If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (page 7). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. Your product may be shipped with a protective sticker covering the telephone base display - remove it before use.
User’s manual CL4939 Big button big display telephone/answering system with caller ID/ call waiting Table of contents Getting started Directory storage................................. 31 Reviewing and dialing a directory entry..................................................... 32 Deleting a directory entry............... 33 Introduction...............................................1 Quick reference guide..........................2 Indicator lights and tones..................4 Screen messages.........
FCC and ACTA information............. 61 Part 15 of FCC rules........................... 63 Limited warranty.................................. 64 Technical specifications.................... 66 Index........................................................... 67 Remote access wallet card.............
Getting started Introduction This AT&T CL4939 big button big display telephone has a large tilt display for easy viewing and extra large buttons for easy viewing and dialing. You must use the supplied power adapter to use most features of this telephone. In the event of power failure, this telephone works only to make or answer calls with the handset. Refer to Line power mode (no AC power) on page 26 for more details. This telephone is hearing-aid compatible.
Getting started Quick reference guide CID/ REMOVE While reviewing the call history entries, press and hold to clear the call history (page 41). Press to display the call history (page 37). While using the menu, press to scroll through the settings (page 15). While reviewing an entry stored in the directory or call history, press to delete (pages 33 and 41). While reviewing the directory or call history, press to scroll down (pages 32 and 37).
Getting started Quick reference guide RINGER VOL switch MENU Slide to adjust the ringer volume (page 14). Press to enter the menu (page 15). While reviewing the call history, press to store the displayed name and number in the directory (page 39). VOL switch Slide to adjust the listening volume on the handset (page 14). VOL switch MUTE Slide to adjust the listening volume on the speakerphone (page 14). During a call, press to mute the handset or speakerphone microphone.
Getting started Indicator lights and tones Indicator lights IN USE On when the line is in use or the answering system is answering a call. Flashes when there is an incoming call. ANS ON/OFF On when the answering system is on. PLAY/STOP Flashes when there are new (unreviewed) messages. AUDIO ASSIST On when the audio assistance feature is in use. MUTE On when the microphone is muted. SPEAKER On when the speakerphone is in use. Alert tones Beep (Key tone) A key is pressed.
Getting started Screen messages Screen icons 16 CALLS 5 NEW NEW The displayed call history entry is unreviewed. REP You have received more than one call from this number. 16 16 ERR 12:00AM 11-20 15 The position of the number stored in the call history. The ringer is turned off. There is an error in the caller ID information. Message window displays 16 CALLS 5 NEW 16 ERR 12:00AM 11-20 15 The message window usually displays the total number of messages.
Getting started Screen messages Display screen messages DELETED All the entries stored in call history have been deleted. -ORThe directory or two-touch memory entry has been deleted. DIRECTORY EMPTY There are no telephone numbers stored in the directory. CALL LOG EMPTY There are no entries in the call history. END OF LIST You have reached the end of the call history records. LINE IN USE Another telephone on the same line is in use. -ORNo telephone line cord is connected to the telephone.
Getting started Telephone installation If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. Follow the steps below to install the telephone. 1.
Getting started Telephone installation 4. Lift the handset or press SPEAKER to check for a dial tone. 5. Rotate the top of the display up or down to adjust the angle of the screen for maximum visibility. NOTES: • Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. • The power adapter is intended to be correctly oriented in a vertical or floor mount position.
Getting started Installation options The telephone base comes with the bracket mounted for tabletop use. If you want to mount your telephone on a wall, use the mounting bracket to connect with a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronic retailers. Professional assistance may be required to install the mounting plate.
Getting started Installation options 3. Plug one end of the telephone line cord into the TEL LINE jack on the back of the telephone base. Route the telephone line cord through the slot. Bundle the telephone line cord and secure it with a twist tie. Place the bundled telephone line cord inside the hole in the center of the telephone bottom. 4. Plug the other end of the telephone line cord into a telephone wall jack. DSL filter (not included) is required if you have DSL high-speed Internet service. 5.
Getting started Installation options 6. Plug the small end of the power adapter into the POWER jack on the back of the telephone base. Plug the large end into an electrical outlet not controlled by a wall switch. 7. Rotate the top of the display up or down to adjust the angle of the screen for maximum visibility. Wall-mount to tabletop installation To change the telephone base from the wall-mount position to tabletop position, follow the steps below. 1.
Getting started Installation options 4. Lift the handset and place it aside. Hold down the switch hook on the telephone base, then slide the handset tab upwards to remove it from the slot. Rotate the handset tab 180 degrees. Push the handset tab down into the grooves so it settles into position. Switch hook Handset tab 5. Lift and rotate the bracket and lock it into tabletop position as indicated below. Wall-mount position Tabletop position 6.
Getting started Installation options 7. Plug the small end of the power adapter into the POWER jack on the back of the telephone base. Plug the large end into an electrical outlet not controlled by a wall switch. Electrical outlet not controlled by a wall switch Telephone wall jack DSL filter (not included) is required if you have DSL high-speed Internet service. Telephone line cord 8. Rotate the top of the display up or down to adjust the angle of the screen for maximum visibility.
Telephone settings Volume control Ringer volume Use the RINGER VOL switch on the right side of the telephone base to set the ringer volume or turn the ringer off. Adjust the RINGER VOL switch to set the ringer volume to off, low, middle or high. When set to off, the screen shows . NOTE: The volume of the priority call tone cannot be adjusted. Refer to Priority call on page 49 for details.
Telephone settings Menu setup Menu operation The screen display prompts help you set up the telephone when you press MENU. NOTE: You can exit feature setup at any time by pressing FLASH or by lifting the handset when there is no incoming call. For complete feature setup options, see Feature summary on this page. Set features You can customize how the features of this product work. 1. Press MENU repeatedly until the screen shows the desired feature. 2.
Telephone settings Menu setup Feature/options Function REPEATED CALLS Choose how new calls from the same number are displayed. COMBINED The screen shows only the most recent call from this number. REP displays to indicate multiple calls from this number. Each call from this number is listed separately. SEPARATE* CALL LIST ORDER Choose in what order received calls are displayed. BY TIME* Most recently received calls are displayed first.
Telephone settings Menu setup Feature/options # OF RINGS 2, 3, 4*, 5, 6, 7, tS 2-4, tS 4-6 Function Set how many times the telephone rings before the answering system picks up the call. If you choose tS 2-4 (or tS 4-6), the answering system answers after two (four, if you select tS 4-6) rings if there are new messages. When there are no new messages, the answering system answers after four (six, if you select tS 4-6) rings.
Telephone settings Menu setup Set date and time SET TIME/DATE --:-- -- - -- 15 MM/DD/YYYY 11 20 2009 --:-- -- - -- 15 hh:mm AM/PM 12 00 A --:-- -- - -- 15 When the telephone is idle, the screen shows the date and time. 1. Press MENU repeatedly until the screen shows SET TIME/DATE. 2. Press SELECT to show MM/DD/YYYY. 3. Use the dial pad keys (0 through 9) to set the blinking digits. To enter a number that is less than 10, you must enter a zero (0) before the number.
Telephone settings Menu setup Set home area code You must program your area code so your telephone can properly recognize and dial calls. For calls within your area code: HOME AREA CODE HAC --- 12:00AM 11-20 15 You dial: Enter in step 2: 7 digits (telephone number, no area code) Your area code 10 digits (area code + telephone number) -OR11 digits (1 + area code + telephone number) 000 1. Press MENU repeatedly until the screen shows HOME AREA CODE. 2.
Telephone settings Menu setup 3. Press SELECT or MENU to save your setting and move to the next option when you have finished entering local area codes. NOTE: If you do not need to program local area codes, press SELECT repeatedly to set other features.
Telephone operation Making and answering a call Using handset To make a call: • Lift the handset, wait for the dial tone, and then dial a number. 12:00AM 11-20 15 To answer a call: • Lift the handset. To end a call while using the handset: • Place the handset in the telephone base. Using speakerphone To make a call: • Press SPEAKER then dial a number. To answer a call: • Press SPEAKER. To end a call while using the speakerphone: • Press SPEAKER.
Telephone operation Chain dialing Use this feature to dial numbers stored in the directory, two-touch memory locations or call history while you are on a call.
Telephone operation Last number redial 8887227702 12:00AM 11-20 15 REDIAL 8887227702_ 12:00AM 11-20 15 Use the following steps to display and dial the last dialed number from this telephone (up to 32 digits). 1. Lift the handset or press SPEAKER. 2. Press REDIAL/PAUSE. The telephone dials the number automatically. -OR1. When the telephone is idle, press REDIAL/PAUSE to show the last dialed number. 2. Lift the handset to call. -ORPress DISPLAY DIAL or SPEAKER to call using the speakerphone.
Telephone operation Options while on calls Audio assist™ Some voices will sound louder and clearer if you press AUDIO ASSIST while you are on a call using the handset. Press AUDIO ASSIST again to turn the feature off. This feature automatically turns off when you hang up. You must press AUDIO ASSIST every time you want to activate the feature. Mute Use this feature during a telephone conversation to silence the handset or speakerphone microphone.
Telephone operation Options while on calls Flash/call waiting If you subscribe to call waiting service from your telephone service provider, you hear a beep if someone calls you while you are already on a call. • Press FLASH to put your current call on hold and take the new call. • Press FLASH anytime to switch back and forth between calls. For more information on caller ID with call waiting, refer to About caller ID on page 34.
Telephone operation Line power mode (no AC power) This telephone provides minimal functionality during a power failure. When AC power is not available, the screen is blank and many telephone features do not function. Only touch-tone dialing and volume adjustment (ringer volume and handset volume) are supported. The telephone uses power from the telephone line to enable you to make and answer calls using only the handset and dial pad keys. To make a call during a power failure 1.
Two-touch memory Two-touch memory overview and storage Two-touch memory overview This telephone has 10 two-touch memory locations (speed dial locations) where you can store telephone numbers you wish to dial using fewer keys than usual. Each two-touch memory location can store a telephone number with up to 24 digits.
Two-touch memory Reviewing and dialing a two-touch number To review two-touch numbers ENTER LOCATION _ 12:00AM 11-20 15 888-722-7702 12:00AM 11-20 15 Use the following steps to review numbers stored in the two-touch memory locations. 1. When the telephone is idle, press MEM. The screen shows ENTER LOCATION. 2. Press a dial pad key (0 through 9) to choose the desired two-touch memory location. The number is displayed on the screen. 3. Press FLASH to return to idle mode.
Directory Deleting a two-touch number To delete a two-touch number ENTER LOCATION _ 12:00AM 11-20 15 888-722-7702 12:00AM 11-20 15 DELETED 12:00AM 11-20 15 ENTER LOCATION _ 12:00AM 11-20 15 Use the following steps to delete a telephone number stored in the two-touch memory location. 1. When the telephone is idle, press MEM. The screen shows ENTER LOCATION. 2. Press a dial pad key (0 through 9) to display the telephone number stored in that two-touch memory location. 3. Press REMOVE.
Directory Directory overview Directory memory capacity This telephone has a directory where you can store up to 25 additional telephone numbers and names. Numbers can be up to 24 digits and names can be up to 15 characters. Directory entries are stored in alphabetical order. You may wish to enter names with the last name first to maintain consistency with information stored through the caller ID features of this telephone.
Directory Directory storage 16 CALLS 5 NEW 12:00AM 11-20 15 CHRISTINE SMITH 888-722-7702 12:00AM 11-20 15 ENTER NUMBER 8003604121_ 12:00AM 11-20 15 ENTER NAME 8003604121 12:00AM 11-20 15 ROBERT BROWN_ 8003604121 12:00AM 11-20 15 STORED 12:00AM 11-20 15 Use the following steps to store a name and telephone number in the directory. 1. When the telephone is idle, press DIR/ to enter the directory. 2. Press SELECT. The screen shows ENTER NUMBER. 3.
Directory Reviewing and dialing a directory entry To review directory entries CHRISTINE SMITH 888-722-7702 12:00AM 11-20 15 ROBERT BROWN 800-360-4121 12:00AM 11-20 15 Use the following steps to review directory entries. 1. When the telephone is idle, press DIR/ to enter the directory. 2. Press DIR/ or CID/ to scroll through the directory entries. -ORPress the dial pad key for the first character of the entry you wish to review until the character you are looking for is displayed.
Directory Deleting a directory entry CHRISTINE SMITH 888-722-7702 12:00AM 11-20 15 DELETED 12:00AM 11-20 15 Use the following steps to delete a directory entry. 1. When the telephone is idle, press DIR/ to enter the directory. 2. Press DIR/ or CID/ to scroll through the directory entries. -ORPress the dial pad key for the first character of the entry you wish to review until the character you are looking for is displayed.
Caller ID operation Caller ID overview About caller ID This telephone has a caller ID feature that works with the caller identification service provided by your telephone service provider. There is a fee for this service, and it might not be available in all areas. This telephone can provide information only if both you and the caller are in areas offering caller identification service, and if both telephone service providers use compatible equipment.
Caller ID operation Caller ID overview How caller ID works If you subscribe to caller ID service provided by your telephone service provider, information about each caller is displayed between the first and second ring. The call is missed and unreviewed. CHRISTINE SMITH 888-722-7702 The call comes more than once.
Caller ID operation Caller ID overview Caller ID special messages Displays: Means: PRIVATE NAME The caller is blocking the name information. PPP The caller is blocking the telephone number information. PRIVATE CALLER The caller is blocking the name and number information. UNKNOWN NAME Your telephone service provider is unable to receive information about this caller’s name. UUU Your telephone service provider is unable to receive information about this caller’s number.
Caller ID operation Reviewing call history Unreviewed and total calls 16 CALLS 5 NEW 12:00AM 11-20 15 When your telephone is in idle mode, the screen shows the number of new (missed and unreviewed) calls and the total number of all incoming calls. Each time you review a call history entry marked NEW, the number of new calls decreases by one. To review call history CHRISTINE SMITH 888-722-7702 16 12:00AM 11-20 15 Use the following steps to review the call history. 1.
Caller ID operation Returning a call CHRISTINE SMITH 888-722-7702 16 12:00AM 11-20 15 1888-7227702 722-7702 1-722-7702 888-722-7702 7227702 12:30AM 11-20 15 Use the following steps to dial a telephone number in the call history. 1. When the telephone is idle, press CID/ to enter the call history. 2. Press DIR/ or CID/ to scroll to the desired caller ID entry. 3. Press DISPLAY DIAL to dial using the speakerphone or press DISPLAY DIAL and lift the handset to dial using the handset.
Caller ID operation Storing a call history entry in the directory CHRISTINE SMITH 888-722-7702 16 12:00AM 11-20 15 STORED 12:00AM 11-20 15 Use the following steps to store the telephone number and name of a call history entry in the directory. 1. When the telephone is idle, press CID/ to enter the call history. 2. Press DIR/ or CID/ to scroll to the desired caller ID entry. 3. Press MENU to store the displayed telephone number in the directory.
Caller ID operation Storing a call history entry in a twotouch location CHRISTINE SMITH 888-722-7702 16 12:00AM 11-20 15 ENTER LOCATION _ 12:00AM 11-20 15 STORED 12:00AM 11-20 15 Use the following steps to store the telephone number of a call history entry in a two-touch memory location. 1. When the telephone is idle, press CID/ to enter the call history. 2. Press DIR/ or CID/ to scroll to the desired caller ID entry. 3. Press MEM. The screen shows ENTER LOCATION.
Caller ID operation Deleting call history entries To delete a call history entry CHRISTINE SMITH 888-722-7702 16 12:00AM 11-20 15 DELETED 12:00AM 11-20 15 Use the following steps to delete a call history entry. 1. When the telephone is idle, press CID/ to enter the call history. 2. Press DIR/ or CID/ to scroll to the caller ID entry. 3. Press REMOVE (entry removal button) to delete the currently displayed entry.
Answering system operation Answering system overview Message capacity 16 CALLS 5 NEW 12:00AM 11-20 15 Message window The answering system can record up to 99 messages, depending on the length of each message. Individual messages can be up to three minutes long, and the total maximum recording time is 19 minutes. Messages remain available for replay until you delete them. If the recording memory is full, the message window displays F. Delete some messages to make room for more.
Answering system operation Answering mode To turn on the answering system To turn the answering machine on and answer calls: • Press ANS ON/OFF repeatedly until the system announces “Answering machine is on.“ The ANS ON/OFF light turns on. 16 CALLS 5 NEW 12:00AM 11-20 15 NOTES: • If the record time left is less than five minutes when you turn on the answering system, the system plays “Answering machine is on, less than five minutes record time left.
Answering system operation Outgoing announcement The outgoing announcement is the message callers hear when calls are answered by the answering system. If the answering system is on (see To turn on the answering system on page 43), the telephone automatically answers calls with “Hello, please leave a message after the tone.“ You can use this announcement, or replace it with a recording of your own.
Answering system operation Outgoing announcement To play the outgoing announcement PLAY 12:00AM 11-20 A USE STOP TO END 12:00AM 11-20 AP Use the following steps to listen to the outgoing announcement. 1. Press SKIP/ANNC. The screen shows RECORD and the message window displays A. 2. Press REPEAT/MEMO or SKIP/ANNC to scroll to PLAY. 3. Press SELECT. The current announcement plays. The message window displays AP. 4.
Answering system operation Message playback To play back messages If you have new messages, the system plays only the new messages (oldest first). If there are no new messages, the system plays all the messages (oldest first). to begin message playback. 1. Press PLAY/STOP 2. Press PLAY/STOP to end message playback. 16 CALLS 5 NEW 12:00AM 11-20 15 NOTE: If there are no messages, when you press PLAY/STOP , the telephone announces, “You have no messages.
Answering system operation Message playback To delete all old messages 16 CALLS 5 NEW 12:00AM 11-20 dE Use this feature to delete all old messages. New (unheard) messages cannot be deleted until you have listened to them. 1. When the telephone is idle, press DELETE. The system announces, “To delete all old messages, press DELETE again.” 2. Press DELETE within three seconds and the system announces “All old messages deleted.
Answering system operation Recording and playing memo Memos are messages you record yourself. They are saved, played back and deleted exactly like incoming messages. You can record a memo as a reminder to yourself, or leave a message for someone else using the same telephone. To record a memo 16 CALLS 5 NEW 12:00AM 11-20 0 Use the following steps to record a memo. 1. Press REPEAT/MEMO. The screen shows USE STOP TO END with a long beep. 2.
Answering system operation Call screening, priority call and call intercept Call screening CHRISTINE SMITH 888-722-7702 12:00AM 11-20 -- If CALL SCREENING is ON (see Feature summary on page 15), the incoming messages on your telephone are played through the speaker while they are being recorded. While call screening, you can slide the VOL switch to adjust the volume to a comfortable level.
Answering system operation Remote access Use the remote access feature to access your answering system from any touch-tone telephone on a different telephone line (away from your home). A three-digit remote access code is required. This code is pre-set to 500. See Feature summary on page 15 to change the code. To access your answering system Use the following steps to access your answering system. 1. Dial your telephone number from any touchtone telephone. 2.
Answering system operation Remote access Replay current or previous message 4 Press while the telephone is playing the day and time the current message was received to go back to the previous message. Press after the telephone plays the day and time the current message was received to repeat the message. Stop 5 Press to stop playback. Skip to next message 6 Press during playback to skip the current message and advance to the next message.
Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For Customer Service, or to purchase accessories or replacement parts, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Have the serial number, found on the underside of your telephone, available when contacting customer service. Please retain your receipt as your proof of purchase. My telephone appears to be dead.
Appendix Troubleshooting I cannot dial out. • First, try all suggestions in There is no dial tone on page 52. • Make sure there is a dial tone before dialing. It is normal if the telephone takes a second or two before producing a dial tone. Wait an extra second before dialing. • Check that all the telephones connected to the same telephone line are hung up. • Make sure to set the DIAL TYPE to the correct setting (pulse dialing or tone dialing) for the service in your area (see Feature summary on page 15).
Appendix Troubleshooting • If you are using the handset when this problem occurs, My calls fade out or cut in and out try unplugging the coiled handset cord and firmly when I am using the plugging it in the handset and telephone base again. telephone. • If you are using the speakerphone when this problem occurs, eliminate any background noise. Noise from the television, radio, or other appliances might cause the speakerphone to cut in and out.
Appendix Troubleshooting My caller ID features • Caller ID is a subscription service. You must are not working subscribe to this service from your telephone service properly provider for this feature to work on your telephone. • The caller might not be calling from an area that supports caller ID. • Both your and the caller’s telephone service providers must use equipment compatible with caller ID service.
Appendix Troubleshooting The telephone does • not receive caller ID or the telephone does not display caller ID • during call waiting. Make sure you subscribe to caller ID with call waiting features provided by the telephone service provider. The caller might not be calling from an area that supports caller ID. • Both your and the caller’s telephone service providers must use equipment compatible with caller ID service.
Appendix Troubleshooting The messages on the • If a caller leaves a very long message, part of it may answering system are be lost when the system disconnects the call after incomplete. three minutes. • If the caller pauses for more than 7 seconds, the system stops recording and disconnects the call. • If memory is full while recording a message, the answering system announces, “Memory is full“ and then hangs up. You need to delete some old messages in order to make room for new messages.
Appendix Troubleshooting Common cure for If the telephone is not responding normally, try resetting electronic equipment: the telephone. Do the following in the order listed: 1. Disconnect the power adapter from the telephone base. 2. Disconnect the telephone line cord from the telephone base. 3. Wait a few minutes before connecting the power adapter and the telephone line cord to the telephone base. 4. Wait for the telephone to synchronize its connection. This might take up to one minute.
Appendix General product care To keep your telephone working well and looking good, follow these guidelines: • Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). • DO NOT expose it to direct sunlight or moisture. • Avoid dropping the telephone or treating it roughly. • Clean with a soft cloth. • Never use a strong cleaning agent or abrasive powder because this can damage the finish.
Appendix Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information • Read and understand all instructions in the user’s manual. Observe all markings on the product. • Avoid using a telephone during a thunderstorm. There might be a slight chance of electric shock from lightning.
Appendix FCC and ACTA information If this equipment was approved for connection to the telephone network prior to July 23, 2001, it complies with Part 68 of the Federal Communications Commission (FCC) rules. If the equipment was approved after that date, it complies with the Part 68 rules and with the Technical Requirements for Connection of Equipment to the Telephone Network adopted by the Administrative Council for Terminal Attachments (ACTA).
Appendix FCC and ACTA information 6. Programming/testing of emergency numbers If this product has memory dialing locations, you may choose to store police, fire department and emergency medical service telephone numbers in these locations. If you do, please keep three things in mind: a. We recommend that you also write the telephone number on the directory card (if applicable), so that you can still dial the emergency number manually if the memory dialing feature doesn’t work. b.
Appendix Part 15 of FCC rules Some telephone equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used properly, may cause interference to radio and television reception. This product has been tested and found to meet the standards for a class B digital device, as specified in part 15 of the FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation.
Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the United States of America, call 1 (800) 222-3111 or visit www.telephones.att.com; in Canada, call 1 (866) 288-4268. 1.
Appendix Limited warranty 5. How do you get warranty service? To obtain warranty service in the United States of America, visit www.telephones.att.com or call 1 (800) 222-3111; in Canada, please dial 1 (866) 288-4268. NOTE: Before calling for service, please review the user’s manual. A check of the PRODUCT controls and features might save you a service call.
Appendix Technical specifications Operating temperature 32°F — 122°F 0°C — 50°C Power adapter input AC120V 60Hz Power adapter output AC6V 350mA REN 0.
Appendix Index A AC power, 26 Announcement, 44–45 Answer a call, 21 Answering system, 42–51 Audible message alert, 17 Audio assist, 24 F Feature summary, 15 Flash, 25 H Handset tab, 9, 12 Home area code, 19 I Important safety information, 60 Indicator lights, 4 C Caller ID, 34–36 Caller ID special messages, 36 Call history, 36–41 Call history setting, 15 Call intercept, 49 Call screening, 49 Call screening setting, 17 Call waiting, 25 Chain dialing, 22 Character chart, 30 L Limited warranty, 64–65 Local
Appendix Index Q Quick reference guide, 2–3 R Recording time, 42 Redial, 23 Remote access, 50–51 Remote access code, 17 Remote access wallet card, 69 Remote commands, 50 S Screen angle, 8, 11, 13 Screen icons, 5 Speakerphone, 21 Speed dial, 27 T Tabletop installation, 11 Technical specifications, 66 Telephone installation, 7 Temporary tone dialing, 25 Toll saver, 17 Tones, 4 Troubleshooting, 52–58 Two-touch memory locations, 27–28 V Voice prompts, 42 Volume control, 14 W Wall-mount installation, 9 68
Appendix Remote access wallet card The wallet card below lists the commands needed to control your answering system from any touch-tone telephone. Cut along dotted line. Call your telephone number, then enter your three-digit remote access code (preset to 500). Action Remote command Play all messages......................1 Play new messages...................2 Delete the message..................3 (during message playback) Delete all old messages.........*3 Fold here. Repeat or go back................
www.telephones.att.com Audio assist™ and Message guard™ are trademarks of Advanced American Telephones. © 2009 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Issue 4 AT&T 09/09.