Quick Start

WHITEVERSIONREVERSED
^ white (reversed)
Cingular 8525 Handheld with Windows Mobile
®
WHITEVERSIONREVERSED
Insert Battery
1. Remove battery cover.
2. Insert the battery so that the gold contacts are aligned.
3. Gently push the battery down to snap it into place.
4. Align the tabs at the top of the battery cover and snap into place.
Insert Battery Get to Know Your Cingular 8525
Set Up Your Cingular 8525
Get to Know Your Cingular 8525
Turn ON Your 8525
Press POWER and hold (1 to 2 seconds) to turn on your
device.
Align Your Screen
When you turn on your 8525 for the first time, you will
be asked to complete a screen calibration process.
Use your stylus to tap the crosshairs and follow the on
screen prompts.
The initialization process takes about three minutes
and when it’s complete your 8525 will display the
Today screen.
Note:
To turn your device
OFF, press POWER
and hold (3 to 4
seconds)
Note:
You can extend your
stylus by pulling it on
both ends.
Stylus
Power
Battery cover latch
Steps?
4
Takes?
1 minute
Tip:
Your battery comes
partially charged.
To find out how to
charge your device,
refer to the ‘Charge
the battery’ section
of your User Manual
(on CD).
76