Troubleshooting guide

186 Avaya CMS Supervisor Report Designer
3D Effects tab
Use the 3D Effects tab to control the 3D appearance of the chart. If the current chart is a
2D chart, this tab is disabled.
Example
3D Effects tab options
You can change the following parameters:
● Elevation - This is a number from 0 through 90 degrees, and describes the relative
height from which a chart is viewed. An elevation of 90 looks directly down on the top of
the chart, while an elevation of 0 looks directly at the side of the chart. The example
charts throughout this document use an elevation of 30 degrees.
● Rotation - This is a number from -360 through 360 degrees, and specifies the angle
that the chart is turned relative to the viewing position. The example charts throughout
this document use a rotation of 60 degrees. Rotation does not apply to 3D pie charts.
● Projection - This selects one of three mathematical algorithms used to give a 3D
appearance on a 2D sheet of paper or computer screen. The following values can be
chosen: