Troubleshooting guide

February 2006 147
Inserting a Report Data Start Time field
!
Important:
!
Important:
Important: Do not position the field over any tables or charts because the table or chart
will be displayed over the field, and the field will not be visible.
This type of field applies to only integrated reports.
To insert the initial start time (the time at which data begins accumulating) for an integrated
report:
1. Select Field from the Insert menu.
The Field Assistant wizard is displayed.
2. In the Types box, highlight Report Data Start Time.
3. Select Done.
The Report Data Start Time field is placed in the upper-left corner of the report.
4. Select the item and drag-and-drop it to the location where you want it displayed in the
report.