Instruction manual

Managing announcements
26 Issue 3 July 2001 Send feedback: [e-mail]
Backing up your announcements
NOTE:
To back up announcements from a TN2501AP circuit pack, you
need to use either FTP or VAL Manager. See the DEFINITY ECS
Administrator’s Guide or your Avaya representative for more
information about these tools.
Make sure you back up your announcements recorded on TN750
and TN750B circuit packs. The system loses announcements
stored on these circuit packs if power is shut down or the circuit
pack is removed.
The TN750C circuit pack has on-board FLASH memory so you
do not have to back it up. However, you may want to back up
your TN750C to another TN750C circuit pack or tape for extra
security. You need to administer the data module that is built into
the TN750 circuit pack before you save your announcements. See
DEFINITY ECS Administrator’s Guide for more information.
!
CAUTION:
Do not copy, save, or restore announcements from a
TN750C to a TN750 or TN750B. It may corrupt the
announcement.
To backup announcements on TN750 or TN750B circuit packs:
1. Type
save announcements and press RETURN to save the
changes.
NOTE:
If you have both TN750B and TN750C circuit packs, save
the announcements from the TN750B slot.