Instruction manual

Deleting announcements
Issue 3 July 2001
25Send feedback: [e-mail]
announcements
Deleting announcements
Let’s delete the unassigned DID announcement assigned to
extension 1234.
We know that the announcement access code is *56. Use any
console or phone with console permissions to delete the
announcement from the announcement circuit pack.
To delete the announcement, use a phone with console
permissions to complete the following steps:
1. Dial the announcement access code.
In our example, we’ll dial *56. You hear dial tone.
2. Dial the announcement extension.
In our example, we’ll dial 1234. You hear dial tone.
3. Dial 3 to delete the announcement from the circuit pack.
4. Hang up the phone.
You also need to remove the information from the system. To
remove the information, use your system administration terminal
to complete the following steps:
1. Type
change announcements and press RETURN.
The Announcements/Audio Sources form appears.
2. Delete the information in the Ext and Type fields.
3. Press
ENTER to save your work.