Instruction manual

Copyright 2001, Avaya Inc.
All Rights Reserved
Printed in U.S.A.
Notice
Every effort was made to ensure that the information
in this book was complete and accurate at the time
of printing. However, information is subject to
change.
Your Responsibility for Your System’s Security
Toll fraud is the unauthorized use of your
telecommunications system by an unauthorized
party, for example, persons other than your
company’s employees, agents, subcontractors, or
persons working on your company’s behalf. Note
that there may be a risk of toll fraud associated with
your telecommunications system and, if toll fraud
occurs, it can result in substantial additional charges
for your telecommunications services.
You and your system manager are responsible for
the security of your system, such as programming
and configuring your equipment to prevent
unauthorized use. The system manager is also
responsible for reading all installation, instruction,
and system administration documents provided with
this product in order to fully understand the features
that can introduce risk of toll fraud and the steps that
can be taken to reduce that risk. Avaya does not
warrant that this product is immune from or will
prevent unauthorized use of common-carrier
telecommunication services or facilities accessed
through or connected to it. Avaya will not be
responsible for any charges that result from such
unauthorized use.
Avaya Fraud Intervention
If you suspect that you are being victimized by toll
fraud and you need technical support or assistance,
call Technical Service Center Toll Fraud
Intervention Hotline at +1 800 643 2353.
Federal Communications Commission Statement
Part 15: Class A Statement. This equipment has
been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
when the equipment is operated in a commercial
environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful
interference, in which case the user will be required
to correct the interference at his own expense.
Ordering Information
Call: Avaya Publications Center
Voice +1 888 582 3688
Fax +1 800 566 9568
International Voice 317 322 6416
International Fax 317 322 6699
Write: 200 Ward Hill Avenue
Haverhill, MA 01835 USA
Attn: Avaya Account Management
Order: Document No. 555-233-757, Issue 3
July 2001
You can be placed on a Standing Order list for this
and other documents you may need. Standing Order
will enable you to automatically receive updated
versions of individual documents or document sets,
billed to account information that you provide. For
more information on Standing Orders, or to be put
on a list to receive future issues of this document,
please contact the Avaya Publications Center.
European Union Declaration of Conformity
Avaya declares that DEFINITY equipment specified
in this document conforms to the referenced
European Union (EU) Directives and Harmonized
Standards listed below:
EMC Directive89/336/EEC
Low Voltage Directive73/23/EEC
Acknowledgment
This document was prepared by the Avaya Product
Documentation Development group, Denver, CO
USA.
Intellectual property related to this product
(including trademarks) and registered to Lucent
Technologies Inc. has been transferred or licensed to
Avaya Inc.
Any reference within the text to Lucent
Technologies Inc. or Lucent should be interpreted as
references to Avaya Inc. The exception is cross
references to books published prior to April 1, 2001,
which may retain their original Lucent titles.
Avaya Inc., formed as a result of Lucents planned
restructuring, designs, builds, and delivers voice,
converged voice and data, customer relationship
management, messaging, multi-service networking
and structured cabling products and services. Avaya
Labs is the research and development arm for the
company.