Instruction manual

Adding announcements
Issue 3 July 2001
21Send feedback: [e-mail]
announcements
You can also use TN750, TN750B, and TN750C announcement
circuit packs to record announcements on your switch. You can
have only one TN750 or TN750B per system, but you can use
one TN750B with many TN750C and/or TN2501AP (VAL)
circuit packs.
Let’s say we have calls coming into unassigned DID extensions.
Let’s record a general message to tell these callers to dial the
company’s main number.
We’ll assign the announcement to extension 1234, and use the
integrated announcement circuit pack located on 01B18.
Tip:
Use
display integrated-annc-boards
to find the cabinet,
carrier, and slot addresses of your announcement circuit packs.
The Integrated Announcement Board screen lists the location and
the type, as well as showing the number of recordings and number
of seconds (at the administered rate) left on each circuit pack.
Our example explains how to add an integrated announcement,
but other types of announcements are available. See DEFINITY
ECS Administrator’s Guide for more information about other
announcement types.
To add an announcement extension 1234:
1. Type
change announcements and press RETURN.
The Announcements/Audio Sources screen appears.
2. In the Ext field, type
1234.
3. In the Type field, type
integrated.