Instruction manual

Setting up night service
14 Issue 3 July 2001 Send feedback: [e-mail]
Let’s direct night calls for trunk group 2 to extension 1245.
To set trunk group night service:
1. Type
change trunk-group 2 and press RETURN.
The Trunk Group screen appears.
Trunk Group screen
2. Enter 1245 in the Night Service field.
The destination can be a night service extension, a
recorded announcement extension, a vector directory
number, a hunt group extension, a terminating extension
group, or
attd if you want to direct the call to the attendant.
3. Press
ENTER to save your changes.
TRUNK GROUP
Group Number: 2 Group Type: co CDR Reports: y
Group Name: outside calls COR: 1 TN: 1 TAC:647
Direction: two-way Outgoing Display? n
Dial Access: n Busy Threshold: 99 Night Service: 1245
Queue Length: 0 Country: 1 Incoming Destination: ____
Comm Type: voice Auth Code? n Digit Absorbtion List: ____
Prefix-1?: y Trunk Flash? n Toll Restricted? y
TRUNK PARAMETERS
Trunk Type: loop start
Outgoing Dial type: tone Cut Through? n
Trunk Termination: rc Disconnect Timing(msec): 500
Auto Guard?: n Call Still Held? n Sig Bit Inversion: none
Analog Loss Group: Digital Loss Group:
Trunk Gain: high
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 10 Receive Answer Supervision? n