Instruction manual

Adding trunk groups
Issue 3 July 2001
7Send feedback: [e-mail]
trunks
Trunk Group screen (group member assignments page)
10. In the Port field, type the port number of the physical
connection for each member you are adding to the trunk
group.
11. In the Name field, type the circuit ID or telephone number
for each member.
This information is very helpful for tracking your system
or troubleshooting problems, but the fields need to be
updated whenever the information changes.
12. Press
ENTER to save your changes.
TRUNK GROUP
Administered Members (min/max): xxx/yyy
Total Administered Members: xxx
GROUP MEMBER ASSIGNMENTS
Port Code Sfx Name Night Mode Type Ans Delay
1: 1B1501___ 5211_______ _________ _______ _____
2: 1B1523___ 5212_______ _________ _______ _____
3: 1B1601___ 5213_______ _________ _______ _____
4: 1B1623___ 5214_______ _________ _______ _____
5: 1B1701___ 5215_______ _________ _______ _____
6: _________ ___________ _________ _______ _____
7: _________ ___________ _________ _______ _____
8: _________ ___________ _________ _______ _____
9: _________ ___________ _________ _______ _____
10: _________ ___________ _________ _______ _____
11: _________ ___________ _________ _______ _____
12: _________ ___________ _________ _______ _____
13: _________ ___________ _________ _______ _____
14: _________ ___________ _________ _______ _____
15: _________ ___________ _________ _______ _____