Instruction manual

Managing trunks
6 Issue 3 July 2001 Send feedback: document@avaya.com
3. Type a name to identify this trunk group in the Group
Name field.
In our example, we used
outside calls.
4. In the TAC field, type the code you want to use to access
the new trunk group.
In our example, we used
647.
5. In the Direction field, indicate the call-flow direction.
For our example, leave the default of
two-way.
6. If you want to direct calls to a night extension, type the
extension number in the Night Service field.
In our example, direct night calls to extension
1234.
7. In the Comm Type field, enter the type of communication
that you want the new trunk to use.
In our example, enter
voice.
8. In the Trunk Type field, type
loop start.
This field tells the system how the calls on this trunk will
be sent or received. Your vendor should know what trunk
type you can use to complete this field.
9. Use
NEXT PAGE to go to the Group Member Assignments
page.
Different fields appear on this screen depending on the
configuration of your switch.