Specifications

Task: assigning user permissions CentreVu CMS Administration
Assigning user data 9-5
................................................................................................................................
...........................................
7 Under Login type, select Normal user if the user does not have access
(by default) to system setup, user permissions, and Forecast (if
purchased); select Administrator if the user has access (by default) to all
parts of CentreVu CMS.
................................................................................................................................
...........................................
8 In the Maximum user window count (1–12), type the maximum number
of open CentreVu CMS windows this user can have. The default is four.
Important! The more open windows you allow, the more processor
resources this user is allowed to consume.
................................................................................................................................
...........................................
9 In the Maximum refresh rate (seconds) field, type the minimum update
rate for real-time reports that this user runs. The default is 30 seconds.
You can set a refresh rate from every three seconds to every 600
seconds.
Important! Faster refresh rates consume more processor resources.
................................................................................................................................
...........................................
10 In the Login ACD field, type the ACD name or number for this user's
current ACD each time this user logs into CentreVu CMS. The default
value is one.
E
ND OF STEPS
..........................................................................................................
.................................................................
Reference
• Users can change their current ACD any time during a login
session by selecting Tools | Options | General. However, when the
user logs out and logs back in, the current ACD defaults back to
what you set in this window.
• If you change a user's login type from administrator to normal or
vice versa after assigning the user data, you must change the user's
feature access permissions manually.
• Before you select Find one or List all , clear the default values,
unless you want to include these values in the search.
• Assigning only the necessary access permissions ensures the best
system performance.