Instruction manual

ODBC Driver and Installation CentreVu® CMS Open Database Connectivity
Desktop Computer Client Installation 2-21
Installation 2
Use the following procedures to install OpenLink ODBC client software.
Windows 95, 98,
2000 or
Windows NT 4.0
2
For Windows 95 , 98, 2000 or Windows NT 4.0, complete the following
steps:
1. Start
Microsoft Windows.
2. Insert the Call Management System OpenLink ODBC driver
compact disk into the compact disk drive.
3. Open the
Windows Explorer.
4. Select your compact disk drive.
5. Select the
Client folder.
6. Select the
Win32 folder.
7. Double click on the
setup.exe file to install the client software.
8. Follow the instructions on your screen.
It is recommended that you accept the
Default installation
configuration.
9. When the
OpenLink Data Access Drivers window is displayed
select, ODBC client has ODBC samples (0.3Mb).
10. Configure your ODBC data sources using the ODBC Administrator
utility resident within your
Windows Control Panel and the
procedures in this section.
Windows NT 3.51 2
For Windows NT 3.51, complete the following steps:
1. Start
Microsoft Windows .
2. Insert the Call Management System
OpenLink ODBC Driver
compact disk into the compact disk drive.
3. From the
Windows Program Manager, choose File (Alt+F), and
then the Run command.
4. Type the compact disk drive letter, followed
by :\client\Win32\setup. For example, if your compact disk drive is
drive
d , then type d:\client\Win32\setup.
5. Follow the instructions on your screen. It is recommended that you
use the
Normal installation option.
6. Configure your ODBC data sources using the ODBC Administrator
utility resident within your
Windows Control Panel and the
procedures in this section.