Instruction manual

ODBC Driver and Installation CentreVu® CMS Open Database Connectivity
Solaris Client Installation 2-15
Solaris Client Installation 2
Introduction 2
The OpenLink ODBC driver software can be installed on a Solaris client
using the installation procedure in this section. Once the software is
installed, it must also be configured using the procedure in this section.
For additional information on installing and configuring the ODBC driver,
see the client on-line help file that is included on the Call Management
System
OpenLink ODBC Driver compact disk.
System
Requirements
2
Before installing the OpenLink ODBC driver software on a Solaris client,
verify that you have met the following list of requirements.
●
The client is communicating with the CMS server over the network:
Use the network protocol’s ping utility to ensure that communication
between the client and the CMS server is functional. Do not proceed
if basic communications between the client and the server cannot be
established. If the client cannot recognize the network, then the
ODBC driver will not function properly.
●
The ODBC clients are appropriate Sun computers with the Solaris
2.4 (or later) operating systems installed.
●
To develop an application using the ODBC API, the complete Solaris
distribution (which provides the libraries and headers) and the
SPARCCompiler
*
must be installed. The development environment
on the
Sun client must be a Solaris 2.4 (or later) operating system.
*SPARCCompiler is a trademark of SPARC International, Inc. and is licensed exclusively to Sun Microsystems, Inc.