Instruction manual

ODBC Driver and Installation CentreVu® CMS Open Database Connectivity
Installing the ODBC Driver on the CMS Server 2-9
Installing ODBC
Version 3.2
2
1. Load the “ CentreVu CMS OPENLINK ODBC Driver” CD.
2. After about 15 seconds, verify the name of the CD-ROM. Enter:
mount
The program responds with a list of devices and file systems
currently mounted. The last line should display the installed CD as
shown below:
3. If this is an upgrade of the ODBC software, enter the following
commands to shutdown the request broker and remove the old
openlink directory; otherwise, proceed to the Step 4
.
a. To shut down the request broker, enter:
/cms/dc/odbc/odbc_init -r 0
b. To remove the old
openlink
directory, enter:
rm -fr /usr/openlink
4. To create the
OpenLink directory and change to the new directory,
enter:
mkdir /usr/openlink
cd /usr/openlink
5.
To confirm you are in /usr/openlink, enter:
pwd
6. To copy the server components from the CD-ROM, enter:
cp /cdrom/cdrom0/server/cmsv6v8/* /usr/openlink
. . .
. . .
/cdrom/openlink on /vol/dev/dsk/c0t2d0/openlink
read only on (
current date and time )