Instruction manual

ODBC Driver and Installation

CentreVu®

CMS Open Database Connectivity

Installing the ODBC Driver on the CMS Server 2-5

Installing ODBC

Version 3.0

Install ODBC version 3.0 only on CMS R3V5 systems.

For the ODBC driver installation procedure for CMS R3V6 and R3V8

systems, see “

Installing ODBC Version 3.2” on page 2-9.

1. Load the “

CentreVu

CMS

OPENLINK

ODBC Driver” CD into the CD-

ROM drive.

2. After about 15 seconds, enter mount to verify the name of the

CD-ROM. The program responds with a list of devices and file

systems currently mounted. The last line should display the installed

CD as shown below:

3. If this is an upgrade of the ODBC software, enter the following

commands to shut down the request broker and remove the old

openlink directory; otherwise, proceed to Step 4

a. To shut down the request broker, enter:

/cms/dc/odbc/odbc_init -r 0

b. To remove the old

openlink

directory, enter:

rm -fr /usr/openlink

4. Create the

OpenLink

ODBC driver directory by entering the

following commands:

mkdir /usr/openlink

cd /usr/openlink

To confirm you are in /usr/openlink, enter:

pwd

. . .

/cdrom/odbc_driver on /vol/dev/dsk/c0t2d0/odbc_driver read

only on Sat Jun 6 11:47:05 1998