User`s guide

Clearing a Configuration
Pressing [F5] (labeled "Clear Config") on the Configuration screen displays
the prompt that allows you to clear the contents of a shift configuration. You
might want to do this if you have made several data entry errors and want to
begin again instead of making changes. If you clear the contents of the
configuration, the values on the Configuration screen return to their initial
settings.
Prompt:
CLEAR CONFIG: This deletes contents of config. Clear Config? (Y/N): __
Action: 1 Type y or n.
2 Press [F8] (labeled "Enter Data"). If you clear the contents of
the configuration, the values on the Configuration screen
return to their initial settings.
NOTE: If you accidentally clear a configuration, you can
restore the configuration by doing the following immediately
after you’ve cleared it: Press [F7] (labeled "Config List") to
select the Configuration List screen. On this screen, press
[F1]
(labeled “Select Config”) to select a configuration. A prompt
asks if you want to save your previous editing changes (which
include clearing the configuration). Type n, and press [Enter]
to restore the cleared configuration to the state it was in the
last time it was saved.
Returning to Other Screens
You can select two other screens from the Configuration screen: the
Configuration List screen and the Administration Menu. You may want to go
to the Configuration List screen to save your new configuration or an old one
you have edited. Pressing
[F7] (labeled "Config List") selects the
Configuration List screen, from which you can:
● Select a configuration to view, build, or edit
● Save your editing changes (or save a new configuration you’ve just built)
● Rename a configuration
● Select a startup configuration
You can return to the Administration Menu from the Configuration screen by
pressing
[F8] (labeled "Admin Menu").
4-44 Building or Editing Shift Configurations