User`s guide

[F2] Remove Que Line (Remove Transfer-Queue Line)
Press this function key to display the prompts that allow you to remove
a transfer-queue line. The information for both the trunk port and the
single-line station port associated with the transfer-queue line is removed
when you use this function.
Prompt: REMOVE TRANSFER QUEUE LINE: Port #:
Action: 1 Enter the port number of the trunk associated with the
transfer-queue line.
2 Press [F8] (labeled "Enter Data").
3 When the confirmation prompt appears, type y to confirm
your request, or
n to cancel it.
4 Press [F8] (labeled “Enter Data”).
[F3] Move Xfr Que Line (Move Transfer-Queue Line)
Press this function key to display the prompt that allows you to move the
transfer-queue line to a different line group.
Prompt:
MOVE TRANSFER QUEUE LINE: ID:
to Group (A-D):___
Action:
1 Enter the ID of the transfer-queue line to be moved.
2 Enter the letter of the line group (A through D) to which the
line is to be moved.
3 Press [F8] (labeled “Enter Data”).
[F4] Chg Xfr Que Info (Change Transfer-Queue Line Information)
Press this function key to display the prompt that allows you to:
●
●
●
●
●
Change the sub-group of the transfer-queue line
Change the System 25 port number of the trunk port associated with the
transfer-queue line
Change the System 25 trunk number of the trunk port associated with the
transfer-queue line
Change the PDC of the single-line port associated with the transfer-queue
line
Change the System 25 port number of the single-line port associated with
the transfer-queue line
NOTE: If you need to change the priority status of a transfer-queue line,
you must do so from the Line Status screen. See “Using the Line Status
Screen” in Section 5.
Administering CMS Lines and Line Groups 4-17