User`s guide

[F4] Chg CMS LineInfo (Change CMS Line Information)
Press this function key to display the prompts that allow you to:
● Add, delete, or change a CMS line’s sub-group
● Change the System 25 port number of a CMS line
● Change the line ID of a CMS line
● Change the System 25 trunk number of a CMS line
● Change the trunk type of a CMS line
● Turn priority on or off for a CMS line
Prompt:
CHANGE CMS LINE INFORMATION: for Old Line ID:
Action:
1 Enter the line ID of the line to be changed.
2 Press [F8] (labeled “Enter Data”).
A second prompt appears:
Prompt:
Line XXXXX: SbGrp:_____
Prt#:
ID: Trk#:______
Typ:_____ Pri(ON/OFF):_____
(where XXXXX is the Line ID).
Action: Enter information only in the field(s) you want to change. Leave
a field blank if you do not want to change it.
1 Enter up to two letters, numbers, or special characters for the
sub-group in which the line is to be included, or enter a
hyphen (-) if you do not want the line to be in a sub-group.
2 Enter the new 5-digit System 25 port number.
3 Enter the new line ID (up to 5 letters and/or numbers).
4 Enter the new 4-digit System 25 trunk number.
5 Enter the new trunk type, G for a Ground Start trunk or L
for a Loop Start Trunk.
6 Enter on to turn priority on for the line, or off to turn the
line priority off.
7 Press [F8] (labeled "Enter Data").
Administering CMS Lines and Line Groups 4-13