User`s guide

4 Enter a unique line ID of up to five letters or numbers to help
you identify the line. You may want to use the last four digits
of the telephone number, an ID which associates the line with
a particular line group (such as SERV1 or SALE1), or an ID
which indicates the type of line (such as WATS1).
NOTE: A CMS line ID cannot begin with the letter “Q.” Only
transfer-queue lines can have ID’s beginning with a “Q.”
5 Enter the 4- digit System 25 trunk number (0001 through 9999).
6 In the Type field, enter G for a Ground Start trunk or L for a
Loop Start trunk.
7 Press [F8] (labeled "Enter Data").
NOTE: To assign priority to the line, use [F4] (labeled "Chg CMS
Line Info").
[F2] Remove CMS Line
Press this function key to display the prompts that allow you to remove a
CMS line.
Prompt:
REMOVE CMS LINE: Port #:
Action:
1 Enter the System 25 port number of a line displayed on the
screen.
2 Press [F8] (labeled “Enter Data”).
3 When the confirmation prompt appears, type y to confirm
your request or
n to cancel it.
4 Press [F8] (labeled “Enter Data”).
[F3] Move CMS Line
Press this key to display the prompt that allows you to shift a line from one
line group to another.
Prompt:
MOVE CMS LINE: Line ID:
to Group (A-D): _
Action: 1 Enter the ID of the line to be moved.
2 Enter the letter (A through D) of the group to which the line is
to be moved.
3 Press [F8] (labeled “Enter Data”).
4-12 Administering CMS Lines and Line Groups