User`s guide

[F5] Admin Supervsr (Administer Supervisor Station)
Press this function key to display the prompt that allows you to add a
supervisor station to CMS or to change supervisor station information
displayed on the screen.
You can enter data for either one or two supervisor
stations. To change a field, enter information only in the field you want to
change.
Prompt:
SUPERVISOR STATION(S): PDC: Port #:
2nd PDC:
2nd Port #:
Action:
1 Enter the PDC for the first supervisor station.
2 Enter the System 25 port number for the first supervisor
station.
3 Enter the PDC for the second supervisor station.
4 Enter the System 25 port number for the second supervisor
station.
5 Press [F8] (labeled “Enter Data”).
[F6] Admin PC Jacks (Administer PC Jacks)
The AT&T CMS PC Interface Card in the PC has two connections (labeled
CU1 and CU2) for wiring to System 25. Use this function key to administer
the two CMS PC jacks by identifying their System 25 PDCs and port
numbers. You must obtain the PDCs and port numbers from the System 25
Administrator.
Prompt:
PC JACKS: CU1-PDC: CU1-Port#: CU2-PDC:
CU2-Port#:
Action: 1 Enter the PDC for PC jack CU1.
2 Enter the System 25 port number for PC jack CU1.
3 Enter the PDC for PC jack CU2.
4 Enter the System 25 port number for PC jack CU2.
5 Press [F8] (labeled “Enter Data”).
[F8] Admin Menu (Administration Menu)
Press this function key to return to the Administration Menu screen.
[F10] Help
Press this function key to view a Help screen for the Administer Stations
screen.
Administering Stations 4-9