User`s guide

Getting Started

STARTING CMS

ADMINISTRATION

These procedures describe turning on the PC and selecting an administration

activity from the Administration Menu.

To start administering CMS:

1 Make sure the PC’s floppy drive is empty; then turn on your PC.

The AUTOEXEC.BAT file, installed on your PC’s hard disk during the

CMS installation process, causes the CMS Menu to be displayed

automatically after MS-DOS Resident Diagnostics are run. (For more

information, see “The AUTOEXEC.BAT File” in Section 3.)

NOTE: If the PC is already on and the C> prompt appears, do the

following to display the CMS menu:

Type

cd \cms

and press

[Enter].

Type

cms

and press

[Enter].

The CMS Menu, shown below, appears.

CMS MENU

CMS CMS1.09:19a 04/18

CALL MANAGEMENT SYSTEM (CMS)

FOR THE

AT&T SYSTEM 25 PBX

F1 Start Call Management

F4 Administer CMS

F5 Print Reports

F8 Exit to DOS

F10 -

Help

F Start

F Admin

F Print

F Exit

1 Call Mgt

4 CMS

5 Reports

8 to DOS

4-4

Getting Started