User`s guide

The CONFIG.SYS File
In order for the CMS software to run properly, you must have a
CONFIG.SYS file in the root (\) directory of the PC’s hard disk. This file
must contain the following lines:
BUFFERS =20
FILES =20
If the CONFIG.SYS file existed prior to CMS software installation, the above
two lines were appended to the file when CMS was installed. If no file
existed, a CONFIG.SYS file containing these lines was automatically created
when CMS was installed.
To view the contents of the CONFIG.SYS file:
1 At the C> prompt, type
cd \
then press [Enter]
2 At the C> prompt, type
type config.sys
then press [Enter].
The contents of the CONFIG.SYS file appear on the screen.
Installing the CMS Software 3-7