User`s guide

TRANSFER-QUEUE LINES
To add a transfer-queue line, obtain a trunk number and System 25 port
assignment for the transfer-queue line’s Loop Start Trunk port and a PDC
and System 25 port assignment for single-line port from the System 25
Administrator. Update the Transfer-into-Queue Planning Form with the new
information.
Referring to the Transfer-into-Queue Planning Form, administer the transfer-
queue line on the CMS Admin Queued Transfer screen. Then generate a
Partial Print of System 25 administration instructions.
NOTE: On the appropriate “Ghost” Voice Terminal for the CMS
Contingency Plan implementation form, add a Personal Line button
for the Loop Start Trunk associated with the transfer-queue line. If
Service Monitoring is desired, add a Personal Line button for the
associated Loop Start Trunk on the CMS Supervisor Voice Terminal
implementation form.
Give the hand-completed System 25/CMS implementation forms and the
computer-generated forms to the System 25 Administrator so that System 25
can be administered to reflect these additions.
VOICE ANNOUNCEMENT
When adding a Voice Announcement Unit (VAU), obtain a PDC and port
UNITS
number from the System 25 Administrator. Update the Voice Announcement
Unit Planning Form, and enter the new information on the Administer
Announcement and Assign Announcement screens. Then generate a Partial
Print of System 25 administration instructions. Give the computer-generated
form to the System 25 Administrator so that System 25 can be administered to
reflect this addition.
10-6 Adding Lines, Stations, or Voice Announcement Units