User`s guide

The voice terminal buttons that are labeled on a Partial Print Button Layout
page reflect the button features that need to be added, changed, or deleted.
As in the illustration, the numbers and labels across the top of the buttons
indicate the following:
a The button number
b The System 25 button feature
c The button feature code.
In this example, Buttons 35 and 37 show button features that need to be
added because of the addition of a line and a voice announcement unit,
respectively.
The label on button 38 means that the feature previously
administered on that button needs to be removed. It’s your responsibility, as
CMS Supervisor, to inform the System 25 Administrator what equipment and
facilities are no longer needed for CMS.
On Partial Print Implementation forms, the following conventions have been
followed:
• If a value appears in ( ), it is strongly recommended that this value not be
changed to ensure optimal CMS functioning.
• A System 25 default value, shown in { }, may be left as is, or changed, if
necessary. It will not affect CMS operation.
• When a value has been filled in for you, and does not have either a ( ) or
{ } around it, the value must
not be changed since it is required for proper
CMS functioning.
For more information about administering System 25 from the the computer-
generated administration printouts, see “Performing Software Translations for
CMS” in the CMS Installation and Startup Guide.
NOTE: It is recommended that after you have administered CMS with
the changes and have generated a Partial Print of System 25
administration instructions that you update the System 25 File by
pressing [F3] (labeled “Update S25 File”) on the Print System25
Instruct screen.
10-4 The Partial Print