User`s guide

• WARNING--DSS Not Working (CU1’s Button # NN for VAU XXXXXX,
PDC ZZZZ)
(where NN is the button number on PC jack CU1, XXXXXX is
the voice announcement unit ID, and ZZZZ is the voice announcement
unit’s PDC).
Effect on Call Management: Calls cannot be transferred to the voice
announcement unit.
Possible Cause Corrective Action
The modular cables
Reverse the cables connected to PC
connected to PC jacks jacks CU1 and CU2. Then restart call
CU1 and CU2 are
management from the CMS Menu.
reversed.
PC jack CU1 is
Check that PC jack CU1 is connected
connected to the to the wall jack assigned to CU1.
wrong System 25 ATL
If this is not the problem, have the
port.
System 25 Administrator check the SIP
connections to the System 25 cabinet
for CU1.
System 25 feature
Have the System 25 Administrator
administration of
check System 25 administration of PC
button number NN on
jack CU1 to see that button number
PC jack CU1 is
NN was administered as a DSS button
incorrect.
for PDC ZZZZ.
Startup Problems 9-9