User`s guide

3 Enter a secondary split number (1 through 6), or enter a
hyphen (-) if you do not want to assign a secondary split.
Leave the field blank if you do not want to change it.
4 Press [F8] (labeled “Enter Data”).
[F2] Flow On/Off (Turn Intraflow On/Off)
Press this function key to turn intraflow on or off for a particular line group.
Each line group’s intraflow status appears in the Intraflow column of the Call
Flow area of the screen.
Prompt:
CHANGE INTRAFLOW: Line Group (A-D): ___
Action: 1 Enter a line group letter (A through D).
2 Press [F8] (labeled “Enter Data”). The intraflow designation
for that line group automatically changes from On to Off or
vice versa.
[F3] Set Thresh (Set Intraflow Threshold)
Press this function key to change the Intraflow Threshold for a split. This
threshold is based on the number of seconds the oldest call has been waiting
in a split’s queue.
The initial setting is 30 seconds. For more information on
intraflow and Intraflow Thresholds, see “Administering Call Flow” in Section
4.
Prompt:
SET CALL FLOW THRESHOLD: Split # (1-6):___ Threshold (0-999 sec):___
Action: 1 Enter a split number (1 through 6).
2 Enter a number of seconds (0 through 999).
3 Press [F8] (labeled “Enter Data”).
[F7] Config Screen (Configuration
Press this function key to return to
[F10] Help
Press this function key to display a
screen.
Screen)
the Configuration screen.
Help screen for the Configure Call Flow
Dynamic Reconfiguration 5-43