User`s guide

Startup Procedures

To start CMS call management, follow these steps:

1 Turn on your PC.

If your PC automatically starts the CMS program, the CMS Menu, shown

below, appears soon after you turn on the PC. For information on

automatic startup, refer to “The AUTOEXEC.BAT File” in Section 3 of this

manual.

If you do not use automatic startup, do the following:

● When the MS-DOS prompt C> appears, type

cd \ cms

and press [Enter].

● When c> appears again, type

cms

and press

[Enter].

This starts the CMS program. The CMS Menu screen, shown below,

appears.

CALL MANAGEMENT SYSTEM (CMS)

FOR

THE AT&T SYSTEM 25 PBX

CMS MENU

CMS CMS1.0 9:19a 04/18

F1 Start Call Management

F4 Administer CMS

F5 Print Reports

F8 Exit to DOS

F10 - Help

F Start

F Admin

F Print

F Exit

1 Call Mgt

4 CMS 5 Reports

8 to DOS

Startup Procedures

5-3