User`s guide

9 To return to the cms directory on disk drive C, do the following. At the
A> prompt type
c:
then press [Enter].
At the C> prompt type
cd . .
then press [Enter].
10 To display the CMS Menu, type
cms
and then press [Enter].
RESTORING SHIFT
If you ever lose a shift configuration (for instance, if you clear a configuration
CONFIGURATIONS AND
by accident), copy the desired configuration (or all configurations) from the
SYSTEM TABLES
working copy diskette as follows:
1
2
3
4
5
6
Repeat steps 1 through 4 in the previous procedure.
To copy all your shift configurations from the duplicate onto the hard
disk, type
COPY a:shift*.cms c:
then press [Enter] .
or
To copy a single shift configuration from the working copy
the following, replacing the X with the number of the shift
copy a:shiftX.cms c:
then press [Enter].
diskette, type
configuration.
To copy the system tables from the working copy diskette onto the hard
disk, type
copy a:systbls.cms c:
then press [Enter].
Remove the working copy diskette when the in-use light on the disk drive
goes out.
To return to the CMS directory on disk drive C, do the following. At the
A> prompt type
c:
then press [Enter].
At the C> prompt type
cd. .
then press [Enter].
To display the CMS Menu, type
cms
and then press [Enter].
4-68 Backing Up Shift Configurations