User`s guide

Printing System 25 Administration Instructions
System 25 must be administered to support CMS operation. In order for
CMS to function properly, System 25 must reflect the same port numbers,
PDCs, voice terminal types, trunk numbers, and trunk types as CMS.
Therefore, if you make changes to any of the above for agent stations, PC
jacks, voice announcement units or lines (CMS or transfer-queue), you must
print out System 25 Administration Instructions and have the System 25
Administrator make the necessary changes before resuming CMS call
management; otherwise, CMS will not operate correctly.
NOTE: Changes to the CMS supervisor station(s) do not appear on
the System 25 Administration Instructions. Any changes to a
supervisor’s station should be discussed with, and administered by,
the System 25 Administrator.
To remind you that System 25 administration is needed, CMS prompts you to
print administration instructions when you attempt to exit CMS
administration. The following message is displayed:
You made changes affecting SYSTEM 25 Admin: Print Instructions? (Y/N):___
Type y and press [Enter] to print the instructions. The following screen is
displayed.
PRINT SYSTEM25 INSTRUCT
ADMIN CMS1.0 3:44p 04/18
Form Print
System 25 CMS Administration
Turn on Printer and Align Paper. (When Ready, Select a Labeled Function Key)
F Full F Partial F Update
F Admin
1 Print
2 Print
3 S25 File
8 Menu
Printing System 25 Administration Instructions 4-63