Instruction manual

Installing the Hardware
Connecting the Voice
Announcement Unit
The voice announcement unit (VAU) connects to the CMS PC through the
“AUX” port on the CMS interface card. Use the 14-foot cord with the DIN
connector included with the CMS interface card to complete the connection.
To connect the VAU to the CMS PC, complete these steps:
1. Turn the PC to show the three jacks on the CMS interface card.
2. Plug the 14-foot cord for the VAU into the jack labeled “AUX” on the
interface card.
3. Plug the other end of the cord into the connecting cord attached to the
back of the VAU.
Figure 2-4 shows the connection between the VAU and the CMS PC.
To ac
outlet
Figure 2-4. Connecting the VAU to the CMS PC
2-14 Installation Procedures