Instruction manual

Installing the Hardware
3.
Install CMS external alert and alert interface (if applicable).
Source: Page 2-9 in this guide.
4.
Assemble and install the CMS supervisor telephone and agent tele-
phones.
Source: MERLIN LEGEND Communications System Installation,
Programming, and Maintenance.
5.
Install the CMS interface card in the CMS PC.
Source: Call Management System Installation Guide.
6. Change the default DIP switch setting on the VDC 600 board to
accommodate CMS (required only on the 6300 WGS and 6286 WGS
with a VGA graphics monitor).
Source: Page 2-11 in this guide.
7.
Connect the keyboard and monitor to the CMS PC.
Source: Installation instructions for the PC.
8.*
Connect the CU1 and CU2 ports on the CMS interface card (in the
CMS PC) to the MERLIN LEGEND control unit.
Source: Page 2-12 in this guide.
9.
Install the voice announcement unit.
Source: Installation instructions for the VAU.
10.
Connect the AUX port on the CMS interface card (in the CMS PC) to
the voice announcement unit.
Source: Page 2-14 in this guide.
11.
Install the printer.
Source: Installation instructions for the printer.
Installation Procedures 2-7