Instruction manual

Programming the MERLIN LEGEND System for CMS
Step
Analog Telephone
1.
Enter programming
Slide the T/P switch to the P
mode
(program) position
2.
Select and assign a but-
Press the button
ton
❑ ❑ ❑ ❑
*
7 5 4
3.
Exit
Slide T/P switch to center posi-
tion
MLX Headsets
To use a headset on an MLX telephone, you must assign a Headset Hangup
and a Headset Status button. In addition, you can assign a Headset Auto-
Answer
and a Headset/Handset Mute button. To assign the headset but-
tons, complete the following centralized programming for each MLX tele-
phone with a headset. (If desired, you can program all of these buttons
except the Headset Hangup button directly at the telephone. ) Refer to Form
4b, Digital/lSDN (MLX) Telephone for the button assignments.
Step
MLX-20L
PC
1.
Display Centralized Pro-
More
[PgUp]
gramming Screen
Cntr-Prg [F4]
2.
Select the extension
Dial extension
Type extension
number to program
number
number
Enter
[F10]
Start
[F10]
3.
Select the line button
range
— For buttons 1-20
— For buttons 21-34
Page 1
Page 2
[F6]
[F7]
Setting Up Optional Equipment and Features 1-31