Instruction manual

Programming the MERLIN LEGEND System for CMS
3.
Enter the CU1 extension Dial number
Type number
and save entry
Enter
[F10]
4.
Enter the CU2 extension Dial number
Type number
and save entry
Enter
[F10]
5. Exit to System Program- Exit
[F5]
ming Exit
[F5]
Exit
[F5]
Set CMS Supervisor to No Ring
Although the CMS supervisor should have access to all CMS lines or trunks,
they should not ring at the telephone. To prevent the lines from ringing, set
the supervisor’s console to No Ring. This programming affects all lines/
trunks—even non-CMS lines—assigned to line buttons on the telephone.
Step
MLX-20L
PC
1.
Display Station Program-
More
[PgUp]
ming screen
Cntrl Prog
[F4]
2.
Enter CMS supervisor
Dial number
Type number
extension number
Enter
[F10]
Start
[F10]
3. Select a CMS line button
Press line but-
Press a line
and enter No Ring
ton
button
feature code
❑
* ❑
3
❑
4
❑
5
❑
*
❑
3
❑
4
❑
5
4. Exit
[ Top Sys Prog ]
[Alt]
+
❑
C
NOTE:
When the fallback plan is started, the lines on the CMS supervisor telephone
must be set to Immediate Ring. The fallback plan will not work if the lines are
set to No Ring. The code for Immediate Ring is ❑ ❑ ❑ ❑
*
3
4
7
.
1-18 Setting Up the Operator Positions