Instruction manual

Programming the MERLIN LEGEND System for CMS
4.
Remove non-CMS
Press line but-
Press function
lines/trunks from line but-
ton for each
key for each
tons
line/trunk until
line/trunk until
green LED is off
letter “G” is
erased
5.
Assign CMS lines/trunks
Press line but-
Press function
to line buttons in the
ton for each
key for each
order they appear on
line/trunk until
line/trunk until
Form 5a
green LED is on
letter “G”
appears
6.
Exit to System Program-
Exit
[F5]
ming Exit
[F5]
Copy Line
Assignments to CMS PC Ports
The two CMS PC ports (CU1 and CU2) must have the same line assignments
as the CMS supervisor’s telephone, including the CMS external alert lines and
loop-backs. To save time and ensure that the line assignments are identical,
copy the CMS supervisor assignments to the extensions for CU1 and CU2.
For those extension numbers, refer to Form 5a, Direct Line Console (DLC)—
Analog.
Step
MLX-20L
PC
1.
Display copy from
Extensions
[F6]
screen
Line Copy
[F2]
Single
[F1]
2. Enter the CMS supervisor
Dial number
Type number
extension and save entry
Enter
[F10]
Setting Up the Operator Positions 1-17