Instruction manual

Programming the MERLIN LEGEND Sytem for CMS

can restore the original settings from the backup. After completing MERLIN

LEGEND programming, backup the MERLIN LEGEND files again. If you are

not familiar with the MERLIN LEGEND backup procedure, contact the MER-

LIN LEGEND system manager or see Chapter 2 of MERLIN LEGEND Com-

munications System Programming.

Setting Basic System

Operating Conditions

Using CMS with the MERLIN LEGEND system requires certain operating con-

ditions. This section gives instructions for setting

the

system mode, extension

numbering scheme, call transfer options, and extension status for CMS.

Sytem Mode

Set the system to key mode or hybrid/PBX mode. Do not set it to behind

switch mode. Refer to the back of MERLIN LEGEND Form 1, System Plan-

ning. The factory setting is key mode.

IMPORTANT:

DO NOT change the system mode if you are adding CMS to an existing

system, unless you plan to reprogram the entire system. Changing the

system mode deletes all current line and telephone programming and

resets them to the factory setting for that mode. You will have to reas-

sign all lines and reprogram all telephones after making this change.

Step

MLX-20L

Display Mode screen

System

[F1]

Mode

[F3]

1-4

Setting Basic System Operating Conditions