Instruction manual

Programming the MERLIN LEGEND System for CMS
Before You Begin
The MERLIN LEGEND system planning forms include all the items required
for CMS, as recorded during CMS planning. The MERLIN LEGEND forms
used for CMS are listed below. Have them available before you start.
■ Form 1, System Planning
■ Form 2a, System Numbering—Station Jacks
■ Form 2c, System Numbering—Trunk Jacks
■ Form 4a, Analog Multiline Telephone
■ Form 4b, Digital/ISDN (MLX) Telephone
■ Form 5a, Direct Line Console (DLC)—Analog
■ Form 6c, Group Page
■ Form 6d, Group Coverage
■ Form 6e, Group Calling
■ Form 6f, System Features
A Word About Programming
MERLIN LEGEND programming includes both system programming and tele-
phone programming. This guide assumes that you are familiar with program-
ming the MERLIN LEGEND system using either an MLX-20L™ display tele-
phone or a PC. For more detailed information about system programming,
see MERLIN LEGEND Communications System Programming.
System Programming
You can perform system programming from the MERLIN LEGEND system
programming console or PC. To enter system programming mode and
display the system programming menu, complete the following procedure
(note that each item listed in the MLX-20L column refers to a menu item on
the system programming console):
1-2 Before You Begin