Instruction manual

Building a Shift Configuration
The Initialization screen (Figure 6-6) appears while the system completes the
Start-Up Test.
Bon Voyage Travel
DAY
CMS R3.0 8:09p 03/04
INITIALIZATION IN PROGRESS . . . SELECT CONFIGURATION
STORED SHIFT CONFIGURATIONS
1 - DAY
2-
UNUSED
3
- UNUSED
4
- UNUSED
5- UNUSED
6
- UNUSED
SELECT CONFIGURATION: Config #:
F Cancel
FPrevious F Next F Enter
1 Prompt
5 Field
6 Field
8 Data
Figure 6-6. Initialization Screen
During the Start-Up Test, an editing prompt appears, asking for the number of
the start-up shift configuration:
SELECT CONFIGURATION :
Config #: _
3. Enter the number of the shift configuration and press [F8].
The screen clears except for the initialization message. When initialization is
complete, the CMS Main Menu appears.
6-16 Choosing A Start-Up Configuration