User`s guide

AUDIX Administration and Data Acquisition Package 585-302-502 Issue 17
May 2002
Using the ADAP Command Line Language
11-7Logging Into the Voice Mail System
11
After you run the login command, perform the following steps:
1. Use one of the following procedures, depending on your PC configuration:
Hayes or AT&T 4000 modem connection:
a. Type atdt
b. Enter the phone number of the voice mail machine administration
port.
MPDM connection:
a. Press (Break).
b. Enter the phone number of the voice mail machine administration
port.
Direct connection:
a. Go directly to step 2.
2. Press until you see the login prompt appears on the screen.
3. Enter your voice mail login ID. The Password (or password for the AUDIX
system) prompt appears on the screen.
4. Enter your voice mail password.
5. If you are connecting to a DEFINITY AUDIX, a System Password prompt
appears on the screen. Enter your System Password.
6. If you enter an invalid login ID or password(s), the following AUDIX system
message appears:
login id/password invalid
OR
the following DEFINITY or I
NTUITY AUDIX system message appears:
Login incorrect
ADAP then prompts you for your login ID and password(s). Check your
login ID and/or password(s), and re-enter each in response to the prompts.
If valid login ID and password(s) are entered, the DEFINITY AUDIX or
I
NTUITY Terminal Type or R1 AUDIX terminal code prompt appears on the
screen.
7. Enter pc.
The following message appears:
Kermit communications server beginning...
If you are connecting to an R1 AUDIX system, you also see:
#N3
F1
ENTER